Anyone using Forester Bars? New Featherlite...

[blades]

been running Forester bars for several years. work ok. Better than what has been coming from Oregon as of late. I would not rate them as high as the pre Oregon Windsor bars. Now that Carlton is part or Oregon also - hard to say what will happen. Carlton Bars were ok also pre Oregon.

 

[Gullet]

been running Forester bars for several years. work ok. Better than what has been coming from Oregon as of late. I would not rate them as high as the pre Oregon Windsor bars. Now that Carlton is part or Oregon also - hard to say what will happen. Carlton Bars were ok also pre Oregon.

Tsumura spoiled me on mono solid steel bars.
Under 20" I don't have a problem with laminated bars, but over 20" I prefer solid steel.
Not sure Oregon ever made a solid steel bar?
Could be wrong on that.

I've had the worst luck with Oregon & refuse to buy them (Overpriced).

Back when I bought my 20 & 24" Forester Platinums (4 or 5 years ago) they were cheap $45/ea.
They are more expensive now so I gravitate more to Tsumura for just a little more money.
Both Tsumura & the Forester solid steel bars have been unflappable for me.

 

[mrxlh]

Just ordered one today for cheaper than you can get them on eBay from the page 1 link. Can’t wait to bar it up on several of my K095 mount saws. https://forestershop.com/

 

[EFSM]

Not sure Oregon ever made a solid steel bar?
Could be wrong on that.

All of Oregon's PowerCut (formerly PowerMatch) replaceable nose bars are solid. At least most of their old ProLite bars were also solid. We've sold them for years and had fine success with them.

 

[Gullet]

All of Oregon's PowerCut (formerly PowerMatch) replaceable nose bars are solid. At least most of their old ProLite bars were also solid. We've sold them for years and had fine success with them.

Their Rim Drive clutch drums are half way decent, that's about it IMO.

So the "Power Cut" bars are solid steel/heat treated/tempered bars & not "Laminated Steel" bars?

 

[EFSM]

So the "Power Cut" bars are solid steel/heat treated/tempered bars & not "Laminated Steel" bars?

Correct. All their other bars are now laminated. Laminated are ok until you bend them; then while trying to straighten them the glue/weld snaps.

We have many customers who are very happy with the Oregon solid bars. I also have a Tsumura reduced weight that's a really good bar. For the price, though, Oregon are great and seem to have good tips that are readily available.

 

[cus_deluxe]

well, it died today…it lost that insert a while ago, didnt seem to be a problem. the guy i work for had it up in the lift today and the snap cut on the piece he was cutting took the saw with it. lucky it didnt rip the saw apart honestly. tip was still in decent enough shape for more service. id probly buy another one.

 

[ammoaddict]

View attachment 432126View attachment 432127well, it died today…it lost that insert a while ago, didnt seem to be a problem. the guy i work for had it up in the lift today and the snap cut on the piece he was cutting took the saw with it. lucky it didnt rip the saw apart honestly. tip was still in decent enough shape for more service. id probly buy another one.

Dang, hate that happened, glad no one got hurt.

 

[cus_deluxe]

Dang, hate that happened, glad no one got hurt.

yeah coulda been way worse.