High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

Another Boat Anchor

Barneyrb

Pinnacle OPE Member
Local time
6:09 PM
User ID
270
Joined
Dec 27, 2015
Messages
410
Reaction score
1,987
Location
Way Down South
Country flag
Where us the picture of the boat?

I'm looking to upgrade my boat say to 24ft. I've been told a standard 041 is good up to 18 and this 041G is good for 24, it's at the max but should still be a good anchor.

dibz on the Windsor bar?

I'd be glad for someone to have it. I've got a 24 that going on that saw.
 
Last edited:

Wood Doctor

Edwin
Local time
6:09 PM
User ID
846
Joined
Feb 9, 2016
Messages
2,521
Reaction score
8,814
Location
Omaha, Nebraska
Country flag
I sold an 041 for almost nothing a few years back. Carbs cost an arm and a leg today if you can find one. I also repaired an 041 for a friend five years ago. He died suddenly but thanked me for doing it before he passed away. 'Nuff said.
 

Barneyrb

Pinnacle OPE Member
Local time
6:09 PM
User ID
270
Joined
Dec 27, 2015
Messages
410
Reaction score
1,987
Location
Way Down South
Country flag
I sold an 041 for almost nothing a few years back. Carbs cost an arm and a leg today if you can find one. I also repaired an 041 for a friend five years ago. He died suddenly but thanked me for doing it before he passed away. 'Nuff said.

If it had been a standard 041 I would have never bought it, this is the 1st 041G (gear reduction) I have ever seen

IMG_20180918_192649565.jpg
 

Barneyrb

Pinnacle OPE Member
Local time
6:09 PM
User ID
270
Joined
Dec 27, 2015
Messages
410
Reaction score
1,987
Location
Way Down South
Country flag
Wow an 041g! That’s neat, plus she’s got a full wrap. Is it points ignition?

Don't know, I just got it and it will be a little bit before I can get into it. I'm not going to restore it but clean it good and make sure it's 100% and then it will be on the market for a new owner.


Congrats, I need to talk with you again in the future. I'm thinking if you have room in your museum I may have a couple of relics for you to consider.
 

heimannm

Mastermind Approved!
GoldMember
Local time
6:09 PM
User ID
714
Joined
Jan 28, 2016
Messages
3,802
Reaction score
26,841
Location
Dike, Iowa
Country flag
Coming to TN next month?

Mark
 

redoakneck

Pinnacle OPE Member
Local time
7:09 PM
User ID
620
Joined
Jan 20, 2016
Messages
878
Reaction score
1,993
Location
Ohio326
Air filter works best if you put it under the cover????
 

Bilge Rat

Here For The Long Haul!
GoldMember
Local time
7:09 PM
User ID
743
Joined
Jan 31, 2016
Messages
1,235
Reaction score
7,632
Location
savannah georgia
Country flag
Yall don't know much about boat anchors.
Need about 20 deg down angle with some weight on the back end.
About 8' of harvester chain for the anchor lead to pull the rope angle down for the whole thing to dig in.

All that and then you need to consider bottom type, mud, sand, rocks etc.

A bow saw would be a better anchor.

The 041 is a cool old beast.
 

Wood Doctor

Edwin
Local time
6:09 PM
User ID
846
Joined
Feb 9, 2016
Messages
2,521
Reaction score
8,814
Location
Omaha, Nebraska
Country flag
Glad I did the right thing. I moth balled a Titan and placed it in a logger's favorite bar for discussion over beers. The data shown here in Post #9 speaks for itself.
 

67L36Driver

Here For The Long Haul!
Local time
6:09 PM
User ID
596
Joined
Jan 18, 2016
Messages
9,623
Reaction score
41,222
Location
Missouri
Country flag
Maybe a trot line in the Missouri but not enuff for a boat.[emoji848]
 
Top