Air filter pics

[cus_deluxe]

View attachment 146686 I think this saw kills more trees, then Most of us guys will do. And it doesn‘t even have an airfilter.
What do you say now?

Its not a secret that the less solids a saw eats the better. Thats an old picture. My guess is that saw is long dead.

 

[RI Chevy]

Cant say that about this one. Fines always make it by into carb from around the seal etc when this saw comes in.

View attachment 146692 View attachment 146693 View attachment 146694 View attachment 146695

If that is an 044/440, it could use the rubber seal gasket. Might solve the issue of passing fines.

 

[Stump Shot]

Amateurs! With some dedication and determination you can go farther and completely destroy the saw.

 

[RI Chevy]

Yikes!!! WTF

 

[Johnmn]

Jonsered 670 probably 4 tanks cutting dead dry maple and Birch. Not bad for a non air injection saw in my opinion.

 

[Stihl working Hard]

Cant say that about this one. Fines always make it by into carb from around the seal etc when this saw comes in.

View attachment 146692 View attachment 146693 View attachment 146694 View attachment 146695

Great pics Iam surprised it hasn’t scored the piston though

 

[Stihl working Hard]

Amateurs! With some dedication and determination you can go farther and completely destroy the saw.

View attachment 146696

Shouldn’t even be allowed to own a saw Steve that atrocious

 

[huskyboy]

View attachment 146705
Jonsered 670 probably 4 tanks cutting dead dry maple and Birch. Not bad for a non air injection saw in my opinion.

Looks like my 930 filter did

 

[Cut4fun]

If that is an 044/440, it could use the rubber seal gasket. Might solve the issue of passing fines.

440 This one didnt come with one and was bought new.

Look at the base I had wanted to do that for him. Then look at the base of the 440 that comes with seal.

 

[huskyboy]

The old style kufner filter on the early 044’s has the gasket on the filter base

 

[RI Chevy]

Not all 440s accept the rubber filter base gasket?

 

[huskyboy]

Not all 440s accept the rubber filter base gasket?

Nope

 

[Deets066]

Here's a "non running" ms461 I got for cheap about a year or so ago. Guy says "well it'll start then die, not sure what's wrong with it. Got it home tossed a new filter on and fresh mix and it ran like a top. Piston looked perfect and compression was great.

It certainly let some fines through but this saw was obviously neglected not to mention that it took a good hit and deformed the filter pretty good.



View attachment 146668 View attachment 146669 View attachment 146670

Probly a good day or two of running... stupid HD 2

 

[Dub11]

View attachment 146686 I think this saw kills more trees, then Most of us guys will do. And it doesn‘t even have an airfilter.
What do you say now?

Child labor laws are for suckas

 

[Bigmac]

 

[redline4]

Is there a woodchuck living in there too?

 

[smokey7]

My mesh filters on my jonnys let a small and i mean tiny amoubt of fines through. When i say tiny i mean after cutting tank after tank atleast 15 or more i get a trace of fines in the elbow if i done grease the mating surfaces.

 

[Duane(Pa)]

 

[Flint Mitch]

Im not quite there yet on the 6421

Curious on the part # of that filter?

Sent from my SM-G892A using Tapatalk

 

[Bigmac]

Is there a woodchuck living in there too?

Not sure if a woodchuck can chuck that much wood?