Is it an upgrade? I put the kit on mine a couple of years ago, my 562 is the first model made, and for those that say they were a worry, its never been, had, or caused, any issues goes well. So i thought i’ll do this upgrade! My old filter wasn’t an issue, as for the upgrade!! I reckon it performed better with the old one, the filter was very easily cleaned and at far less intervals. I hate these new pleated filters, hard to clean in the field, theres plenty room for it to be far bigger too plus filter the top. Pleats hold dust… buggas a things, but I ain’t changing it all back now and like the 592 one puts up with it. But a famn good saw i have found it to be.. 24” duralite & full chisel skip
Take a picture on the intake horn and post it.Is it an upgrade? I put the kit on mine a couple of years ago, my 562 is the first model made, and for those that say they were a worry, its never been, had, or caused, any issues goes well. So i thought i’ll do this upgrade! My old filter wasn’t an issue, as for the upgrade!! I reckon it performed better with the old one, the filter was very easily cleaned and at far less intervals. I hate these new pleated filters, hard to clean in the field, theres plenty room for it to be far bigger too plus filter the top. Pleats hold dust… buggas a things, but I ain’t changing it all back now and like the 592 one puts up with it. But a famn good saw i have found it to be.. 24” duralite & full chisel skip
I tried the V1 setup, the V2 setup, and finally a Redbeard stack adapter with a green weenie before I stopped having fines making it into the carburetor. Admittedly the saw is my designated loaner (dust as opposed to chips is more common during it's use) but nothing kept the dust out. Even greasing the filter edges did next to nothing.
