560xp in the states ?

[BonScott46]

8900 listed on Huskies homepage in Sweeden though.
Never bought a new Husky from my dealer, clueless how much he would withdraw but I doubt 2500

Not really deal prices just pricerunner. 560 prices fluctuate a bit, I have seen them down as low as 6000kr.

https://www.pricerunner.se/pl/120-3132045/Traedgaardsmaskiner/Husqvarna-560-XP-priser

https://www.pricerunner.se/pl/120-3132038/Traedgaardsmaskiner/Husqvarna-560-XP-G-priser

Then there is the 550xp which costs more than a 560xp.

https://www.pricerunner.se/pl/120-3132085/Traedgaardsmaskiner/Husqvarna-550-XP-priser

 

[BonScott46]

From what I have heard they are small bar mount, smaller air filter and lower profile top cover, 24 inch max recomended bar length (don't know if it has a lower capacity oiler or it is because of the small bar mount) and a little less real world power vs. the 562. Don't know if the software is different for the autotune or not.

 

[sawmikaze]

From what I have heard they are small bar mount, smaller air filter and lower profile top cover, 24 inch max recomended bar length (don't know if it has a lower capacity oiler or it is because of the small bar mount) and a little less real world power vs. the 562. Don't know if the software is different for the autotune or not.

I've heard people say they don't like the small bar mount of a 560/2260 because they wanna be able to run bigger bars..You can get k095 bars up to 28".

How big of a bar do you wanna run on a 60cc saw ?

 

[sawmikaze]

Hell just buy a 2260 and call it good, simple solution, and it looks better in red and black anyways.

I already have one.

 

[dustinwilt68]

Then you are set.

 

[huskyboy]

The oilers are different if I’m not mistaken. Forgot where I read up on it, but the 562 oiler puts out more oil I believe.

 

[BonScott46]

I've heard people say they don't like the small bar mount of a 560/2260 because they wanna be able to run bigger bars..You can get k095 bars up to 28".

How big of a bar do you wanna run on a 60cc saw ?

You see guys with ported 562's on YOutube running 28-32 inch in softwood no problem.

 

[Deets066]

You see guys with ported 562's on YOutube running 28-32 inch in softwood no problem.

Very possible, just gotta tailor a chain to suit your needs

 

[dustinwilt68]

I have heard the oiler will do a 28 but not a 32 very well.

 

[BonScott46]

Does the 572 have the same oiler? Recomended bar length is the same.

 

[Dub11]

I've heard people say they don't like the small bar mount of a 560/2260 because they wanna be able to run bigger bars..You can get k095 bars up to 28".

How big of a bar do you wanna run on a 60cc saw ?

I got a 32" K095 lol. Plitz kit in the making!

 

[huskyboy]

I don’t think you can swap the 562 oiler on the 555/2260/560. I could be mistaken though.

 

[afleetcommand]

I don’t think you can swap the 562 oiler on the 555/2260/560. I could be mistaken though.

Here, posted up in the technical area. STARTS the same as the prior video, but gets into a detailed discussion of the differences. Jump to minute 3

And YES I got feed back from the Ausi's letting me know there is a non stuffer large mount version sold there, a 556 or something.

 

[kingOFgEEEks]

And YES I got feed back from the Ausi's letting me know there is a non stuffer large mount version sold there, a 556 or something

Large mount and bigger oiler to run .404 in Aussie hardwood?

 

[MustangMike]

A guy on AS had one, I ran against it with my 362 at a GTG, Ironworker??? Have not heard from him in a long time. He sold it though, even though he previously said he never would.

Heck, weight don't matter to you, just get the 562!

 

[Tor R]

A guy on AS had one, I ran against it with my 362 at a GTG, Ironworker??? Have not heard from him in a long time. He sold it though, even though he previously said he never would.

Heck, weight don't matter to you, just get the 562!

they hardly flip any 562 in Norway, doubt they sell 5 of them in Sweeden.
Mostly it's 550 they sell, but in the 60cc class its pretty much 560xpg. My dealer told me that they didnt sell that much 555 either, 60cc = 560 xpg.

That can maybe change with the 572, but I doubt it will change much on the 562 sale, majority will still be 560.

Personally, 560 vs 562, I may go for 562 xpg if I wanted a new 60cc saw.

 

[BonScott46]

they hardly flip any 562 in Norway, doubt they sell 5 of them in Sweeden.
Mostly it's 550 they sell, but in the 60cc class its pretty much 560xpg. My dealer told me that they didnt sell that much 555 either, 60cc = 560 xpg.

That can maybe change with the 572, but I doubt it will change much on the 562 sale, majority will still be 560.

Personally, 560 vs 562, I may go for 562 xpg if I wanted a new 60cc saw.

Exactly.

 

[sunfish]

I'd call Spike60 and ask if he would put a new 562 topend on a new 555.

 

[sunfish]

With Jred going away, I wonder if Husky will offer the 560 over hear at some point?

 

[sawmikaze]

With Jred going away, I wonder if Husky will offer the 560 over hear at some point?

I hope so.