Kiwioilboiler
346 Pic Examiner
- Local time
- 10:04 PM
- User ID
- 12322
- Joined
- Apr 20, 2020
- Messages
- 8,663
- Reaction score
- 53,616
- Location
- Marsden Pt, NZ
Hi.
My 372 is an 2008 model and appears to have had EPA limiters removed. This i am of course fine with, the issue is that the tuning screws left behind have a tiny surface area and therefore even tinier slot for a tuning screwdriver. Makes it near impossible to tune in the wood because a screw-driver has virtually nothing to aim for.
I thought maybe a bit of rubber tube over the screw ends that still fitted in the 'guide' might help a screw-driver hit the target easier. Any better or other ideas?
Cheers.
My 372 is an 2008 model and appears to have had EPA limiters removed. This i am of course fine with, the issue is that the tuning screws left behind have a tiny surface area and therefore even tinier slot for a tuning screwdriver. Makes it near impossible to tune in the wood because a screw-driver has virtually nothing to aim for.
I thought maybe a bit of rubber tube over the screw ends that still fitted in the 'guide' might help a screw-driver hit the target easier. Any better or other ideas?
Cheers.