SOLD 350/346 project

[Funky sawman]

Selling a almost complete project saw.
350 Husqvarna
Missing brake handle, coil, cover, muffler and clutch and drum and finally a piston.
Includes 2 OEM Zama carbs, 2 intake tracks, very nice OEM 42mm 346 cylinder, two top covers. Bottom end has been sealed up but looks nasty, lots of sealant every where, so I recommend tearing down to reseal.
The 350 is a low hour unit, has exhaust scoring from intake air leak. Crank is excellent. Will get pics later. 150 shipped lower 48. The one Zama carb is like new.

 

[Stump Shot]

@Woodrow

 

[davidwyby]

Hmm… @huskihl?

 

[huskihl]

Hmm… @huskihl?

Lol.
I thought you were into the black and red nowadays?

 

[davidwyby]

Lol.
I thought you were into the black and red nowadays?

They are prettier but the treemonkey 359 I just got made me realize I like the husky angled handle better. @Woodslasher you got any parts?

 

[Kiwioilboiler]

They are prettier

That's the cost. The pretty ones give more grief.
Goes for chainsaws too.

 

[jacob j.]

They are prettier but the treemonkey 359 I just got made me realize I like the husky angled handle better. @Woodslasher you got any parts?

I can come up with parts if you end up taking this on.

 

[Shane¹]

Selling a almost complete project saw.
350 Husqvarna
Missing brake handle, coil, cover, muffler and clutch and drum and finally a piston.
Includes 2 OEM Zama carbs, 2 intake tracks, very nice OEM 42mm 346 cylinder, two top covers. Bottom end has been sealed up but looks nasty, lots of sealant every where, so I recommend tearing down to reseal.
The 350 is a low hour unit, has exhaust scoring from intake air leak. Crank is excellent. Will get pics later. 150 shipped lower 48. The one Zama carb is like new.

Got any pics?

 

[Funky sawman]

This evening

 

[Funky sawman]

They are prettier but the treemonkey 359 I just got made me realize I like the husky angled handle better. @Woodslasher you got any parts?

I might be able to find the rest of the parts. If you want I can save the saw for you when you get up here. Save you about 30 dollars!

 

[Funky sawman]

This is all I got for the moment as far as picts go. It's been crazy trying to get my crap together for sawing season to start up again, gotta save time for my wife and kid!

 

[Woodslasher]

They are prettier but the treemonkey 359 I just got made me realize I like the husky angled handle better. @Woodslasher you got any parts?

Nope, just a few intake bits. I've almost kinda gotten close to thinning out my saw cra.... stuff to as little as possible.

 

[Funky sawman]

 

[Funky sawman]

 

[Funky sawman]

 

[Funky sawman]

125 shipped

 

[davidwyby]

Ok I’ll do it. Fellers, please let me know on what parts you have to fill in the blanks. Do I need a base adapter block thingy?

 

[Funky sawman]

Ok I’ll do it. Fellers, please let me know on what parts you have to fill in the blanks. Do I need a base adapter block thingy?

This saw has the course thread block which if the saw is to be ported, I highly recommend getting the newer "machine thread" block.

 

[Kiwioilboiler]

This saw has the course thread block which if the saw is to be ported, I highly recommend getting the newer "machine thread" block.

I've discovered three versions to be honest.
Coarse Coarse. (Cylinder, Case)
Fine Coarse.
Fine Fine.

Only Coarse Coarse no bueno I reckon.

 

[Johnmn]

I've discovered three versions to be honest.
Coarse Coarse. (Cylinder, Case)
Fine Coarse.
Fine Fine.

Only Coarse Coarse no bueno I reckon.

I have a coarse - coarse j-red version, I added sealant to the treads and have had zero issues.