066 / MS660 R Magnum AV Annular Buffers

[Timbco84]

Looking for some solid info on what annular buffers come on 066 / MS660 3/4 wrap handlebar Magnum saws in stock configuration? There are 3 replacement options of soft, normal and hard. I have seen some speculation that some models factory equipped with wrap handles and long bars come with harder durometer AV mounts. Just looking for info of the actual correct replacement Stihl OEM annular buffers for these saws so vibrations and chassis flex stays the same as factory produced. Thanks.

 

[jmester]

Just looked over the ipl. Stihl doesn't break it down to witch av buffers are on the wrap saws specifically.

The av buffers them selves have identifying number moulded in to them.

Like 1122/22 for the hard av buffer. That has the metal plate that bolts to the pto side case.

Thinking you will have to pull the buffers and check the numbers on them to be sure.

 

[Timbco84]

I was able to find enough numbers on the destroyed av mounts to identify which durometer they were. On this red light 066 with 3/4 wrap handle, the installed mounts were "hard". I have no way to confirm they are the originals based on the age of the saw and it having changed hands at least twice, although no I indications that they were not the originals. Hopefully somebody sees this thread that has a little more insight.

 

[Nutball]

I personally would choose the softness based on the bar length I'd use most, harder for longer bars.

 

[davidwyby]

Anyone figure out numbers for hard/soft?

 

[jacob j.]

Anyone figure out numbers for hard/soft?

Aren't the numbers in the IPL? They list hard, normal, and soft with the respective part numbers.

 

[davidwyby]

Aren't the numbers in the IPL? They list hard, normal, and soft with the respective part numbers.

 

[davidwyby]

 

[davidwyby]

I had heck finding the right full wrap elbow too. Finally got one that was listed for a 362 that fit, then I broke it again

Finding stihl parts info is

 

[jacob j.]

I had heck finding the right full wrap elbow too. Finally got one that was listed for a 362 that fit, then I broke it again

Finding stihl parts info is

Ask Ray "The Bludgeoner" Benson for a copy of the paper 461 IPL @ray benson.

 

[Woodwackr]

I had heck finding the right full wrap elbow too. Finally got one that was listed for a 362 that fit, then I broke it again

Finding stihl parts info is

The little plastic elbo? I should have those…
Pic?

 

[davidwyby]

Ask Ray "The Bludgeoner" Benson for a copy of the paper 461 IPL @ray benson.

I’ll wait for him to come around but it seems like it might be a good idea to buy the one I see on fleabay.

 

[ray benson]

I’ll wait for him to come around but it seems like it might be a good idea to buy the one I see on fleabay.

Check your inbox. 362 and 461 ipls.

 

[jacob j.]

Check your inbox. 362 and 461 ipls.

Can I get the one for 362 Ray? Thank you!

 

[ray benson]

Can I get the one for 362 Ray? Thank you!

Added you to the conversation with David