066 bar stud

[wavyoak]

Anybody know what size helicoil it takes for a 066 bar stud?
Thanks guys.

 

[Glock37]

time sert or thread sert best option

 

[Woodwackr]

Anybody know what size helicoil it takes for a 066 bar stud?
Thanks guys.

Neither. Just replace with an oversize stud from Stihl.

 

[Junk Meister]

Neither. Just replace with an oversize stud from Stihl.

Does Stihl Make this oversize as a stud/Boss repair or is it from a different model saw?

 

[Woodwackr]

Does Stihl Make this oversize as a stud/Boss repair or is it from a different model saw?

Repair part. I don’t remember the #. I think they are the same as the old 056 studs.

 

[two4spooky]

Yes, there is an OEM repair (over-sized) stud for this. Do not drill out or use other methods, you may lose the easy options. Stihl has over-sized bar studs for repair of stripped case side bar studs for several series. Google is your friend here

 

[two4spooky]

Does Stihl Make this oversize as a stud/Boss repair or is it from a different model saw?

STIHL has a repair/replacement stud for this

 

[ZeroJunk]

I'm thinking the replacement studs are for plastic case clam shell saws. I have a drawer full of them.
If you want to go larger in to magnesium I think you will need to tap it. Like using an 056 Magnum stud and re-tapping it.

Well, guy on eBay has a Stihl part number for an oversize magnesium case stud. So,