046 Arctic wiring help

[Ryan Browne]

Just to update, I followed @Glock37 advice and connected to just 1 wire off the generator. I used the yellow, as it was longer.
It's just a cobbled mess right now, but I wanted to be sure it worked before crimping terminals and routing wires.
View attachment 215941

The wire guage I used on the rear element is too large to route nicely, so that will be getting cut off and new leads connected to it. I had a more appropriate guage wire at work.
But, they work.

Thanks guys!

Nice Ed! If this is not your first heated saw, you already know this, but if you haven't yet had the pleasure, heated handles are the $HIT!