ZERO's latest activity
-
"On the handle side, there's a spot that has a bit of extra metal with an indent, it looks like it could be or was maybe intended to be... -
No idea what ro-da-dies is. Common sense is sorted, I lack experience with cast and heat outside of the kitchen. I was going to start...
-
Apply a generous amount of common sense and RO-DA-DIEs
-
Are stoves fair game to chat about here? I've got a Jotul F3CB I've had installed for the last 2 years and it's been a great stove for...
-
Could be 6202 or similar, they upgraded the 562 bearing because of issues with the previous ones did they upgrade them to the same level...
-
If it's got something similar to 6202 bearings then it's fine, most older 70 cc saws ran 6202 just fine
-
A saw running on bearings designed for a 60cc saw and its power putting out the power of a 70cc saw has some concerns.
-
Scott said that they updated 562 bearings in the past and that the 564 uses the same part number as the newer updated 562 bearings. No...
-
ZERO reacted to Partner's post in the thread So what's the current two stroke oil favorite? with
Like.
The point is not to use the saw for too long -
ZERO reacted to ammoaddict's post in the thread So what's the current two stroke oil favorite? with Like.
Yep.
-
ZERO reacted to Tomos770's post in the thread So what's the current two stroke oil favorite? with Like.
Pro saw with limiters on its carburetor?
-
Thanks for all the info. They're for sale for $200 for all of them. I'm going to pass. Scott
-
Super 44, AF cover is on backwards 1-4X, possibly a 200 I will defer to Bill PM610 Nothing significant there, the Super 44 @ 80cc and...
-
Bill, I think you are correct, I was thinking it looked a bit like my D-44, but there are differences between the two with the air...
-
I am guessing the red box one is a 200 or 250. These are listed around 80cc, but not some of the more popular from what I hear. I picked...