Recent content by Socalmisfit

Thanks guys. I was looking and I can pick up a bench disc sander pretty cheap so I think that’s what I’ll go with. Or a table belt if I can find one.

The title is suppose to say grinding not finding I can’t edit the title ‍♂️ So I bought a pferd bar file, and a roller tool to bring the groove back to new. I used the file yesterday on my tsumara bar and it doesn’t want to file at all. I used it on a husky bar and it works perfect, takes...

Cool thanks

?

It’s in good shape? .050 or .063? DL?

I do like these numbers. I’ve tried 60 30 and the chain goes dull way too quick. Might try 60 25 on 1 next time and see how I like it.

Yes it is the 10 degrees like with the file. In theory you shouldn’t have to measure, the grinder should grind both sides the same when you swivel it. So if they are off than the grinder is off. I’ll check it next time I grind at 0 offset and see how it acts.

I measure them but if they are off by anything it is nothing really. I’ll start setting at zero and see if they are better.

Yeah I do that but 1 side just looks off from the other. I measure and they are close it’s just weird.

The jolly evo. It’s a nice grinder just seems off a little. I’m looking at the next one up from it. The one with the hydraulic clamp looks like it is adjust forward and back now too. But the next one up from the Jolly has the swivel base, and the regular clamp. grinding is cool, chains are...

Lookin to see if anyone has a big husky long bar out there. Like 42” or longer, it’s for my 395 so I’m not worried it won’t pull it. I run a 32 on it but some rounds I get are still too big. Would like a 48” if possible. Let me see what you got thanks.

So I have a tecomech grinder but the 10 degree offset is on the side not the swivel base. So you adjust forward or back for right and left teeth. Was wondering if anyone has tested both types and which you liked better. I feel like with the offset forward and back the teeth are different. I...

I appreciate the reply I have the 372 tool I guess I would only need the other kit to get it done. Then swap the sleeves around?

I’m gonna be putting cases on my 395 soon and can’t find the part numbers for the crankshaft assembly set. The tool that pulls the crank back through the cases. If anyone knows the part number I would appreciate it. Also the seal install tool. Thanks guys.

A 395 will feel like it’s trying to pull you through the cut. When the saw is dug in hard and you are WOT there is a chance you and the saw will be sucked through the 3/8 gap. This saw is almost 25cc more than a 372. It’s like getting off a CR 250 2 stroke and getting on a CR 500. I have a 372...