president's latest activity
-
PI happened to be talking with a little birdie on the telephone with unrelated business and this came up. As it was told to me, Dave was...
-
Pnot much, 19 would be pre epa. both will work fine on a stock saw. if your going to port it i would use a16 from a 460
-
Ppresident reacted to heimannm's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
Thanks JJ, I just needed a little push in the right direction... The text gives a value of 0.17-0.19 µf, I will have to pull the... -
PGreen rings are the area where the filter can’t suck fresh air. That’s why the max flow cover is wider. Cover with removed rips and so on
-
PI love it Ed! If I count have found a used tank for a reasonable price that’s the way I would have gone. Used tanks were all 2/3’s the...
-
PI've circled the later style throttle rods in your picture that would be compatible with 660.... the throttle rods not circled are the...
-
PReady to fire up tomorrow!
-
PAn advanced timing can cause this.
-
PIf both are stock- I like the 394 better. It has a wide torque band. Modded then the 395 becomes a beast. The intake boot design on the...
-
PWhich one has a 56mm bore and cylinder fed (not bottom fed) xfers?
-
PThe flat top is alive :D Runs and cuts like my old one...same motor but a RE... Scary fast with a 28, 8t, full comp. Oe topend, New...
-
P36 404 full comp in European beech. 064 TM
-
Ppresident reacted to singinwoodwackr's post in the thread WANTED Wanted complete MS660 tank with Like.
I have all the parts for 066s and a few 660 housings (they are wider). If the trigger parts are all the same I have everything. Try...
-
PBought all this for $50 today. Already sold the Polaris Indy 400 classic to my dad along with the jiffy ice auger for $100. That's a...