president's latest activity
-
Ppresident reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with
Like.
Squish, that looks great. You do what works for your situation, and being able to store the grinder away when not needed saves room. My... -
Ppresident reacted to Philbert's post in the thread Chain Service Tools and Sharpening Station with Like.
Old school chain. Still used in some industrial applications. Might see it on some antique or collectors’ saws. Philbert
-
Ppresident reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with Like.
Junk Miester, I just set this all up for chain service and I hated in the past looking through little boxes for the right pieces and...
-
Ppresident reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with Like.
el33t, attached is the most current spec chart with color codes that match the labels on the grinding wheels. You set the B to + or - 15...
-
Ppresident reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with Like.
Thought I would share my setup for service on saw chains and sharpening and filing. Maybe help someone with an idea and if there are...
-
PSorry, you have fresh gas. Something between the carb and tank seems odd for the info you posted. The engine pops on starter fluid...
-
PCheck the coil-flywheel gap. Unplug the kill wire at the coil to rule out a short. Try a different plug Make sure you’re cranking it...
-
Ppresident reacted to lehman live edge slab's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
That’s because its a Stihl ms 162 not a husky, also why I posted in the Stihl section for brand specific forums.
-
PGenerally speaking you can't hone out ovality or taper on a plated cylinder .Transfer you can remove but use something like 3M "Scotch...
-
Ppresident replied to the thread STIHL The Official Stihl Chainsaws Thread.thats the wrong exhaust for a husky 162
-
Ppresident reacted to heimannm's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Carl - the OEM coils indeed have some advance built into the electronics, and will not produce a spark at lower speeds, I think...
-
POne of biggest pains in my back sides got me again .Husky 281 I've changed the carb ,changed all the anti vibes .the coil .Evidently...
-
Ppresident reacted to drf256's post in the thread Difference between Walbro WT 426 and WT 194 carburetors. with Like.
I can’t remember what the 426 looks like. If all 3 parts of the bore are the same, and it’s H adjustable, there should be little...
-
Ppresident reacted to Stump Shot's post in the thread Landing Saw Sharpening, Lil' Help Please! with Like.
Harvester chain is usually 3/4" you can measure center to center across three rivets to tell. I guess I would have to ask the operator...
-
Ppresident reacted to Philbert's post in the thread Landing Saw Sharpening, Lil' Help Please! with Like.
Not a big deal. The burr should disappear within a second, in use, if you are grinding correctly. How are you ‘dressing’ a ‘diamond’...