Maintenance Chief's latest activity
-
This was after our weekend morning walk last Saturday, pup was tired, didn't wanna pose for pictures. Hint, pup with collar equals... -
I'd be willing to trade on some good quality .404 chain, as well
-
Maintenance Chief reacted to huskihl's post in the thread Stihl ms460 build what happened? with
Like.
When you polish aluminum transfer it ends up looking like shiny plating. It’s also probable that there’s a sharp edge of plating where... -
Maintenance Chief reacted to farminkarman's post in the thread Stihl ms460 build what happened? with Like.
That would be my guess. When removing transfer, a person has to be very careful to make sure there aren't any high spots left.
-
Maintenance Chief reacted to FederalQ's post in the thread Stihl ms460 build what happened? with Like.
The marks on the new piston definitely mirror the scoring on the old piston like there was some transfer or imperfections left on the...
-
Maintenance Chief reacted to jacob j.'s post in the thread Stihl ms460 build what happened? with Like.
I'd clean up the cylinder again and get all traces of that old gasket out of the muffler. The piston isn't damaged that badly and will...
-
Maintenance Chief reacted to Junk Meister's post in the thread Stihl ms460 build what happened? with Like.
You were waiting for your new Muffler. How clean was the original. You might have pulled some Carbon or crud back in through the...
-
Maintenance Chief reacted to jacob j.'s post in the thread Stihl ms460 build what happened? with Like.
I wouldn't called that "scored" necessarily - more like wear/witness marks. It looks like there's some residue left around the exhaust...
-
Pup was waiting for the finished BBQ on the cold shop floor
-
Maintenance Chief reacted to Duane(Pa)'s post in the thread Bunch of random pics of cutters with Like.
IDK, but it sure is painful to watch if they feel the need to post a video.
-
Maintenance Chief reacted to farminkarman's post in the thread Bunch of random pics of cutters with Like.
I just sharpened one like this last week for a coworker. I don't know how people tolerate running a chainsaw with a chain like this.
-
Maintenance Chief reacted to Philbert's post in the thread Bunch of random pics of cutters with Like.
Oregon and STIHL (and others ?) have published chain failure guides that might explain something like that. There are also guide bar...
-
Maintenance Chief reacted to Squish9's post in the thread Bunch of random pics of cutters with Like.
Here is a Stihl 36RS that has been "sharpened" with a grinder The problem is That's not going to cut anything.
-
I think I have every chain sharpening mistake and all types of chain damage covered with this lot of chains. Plan to use them with the...
-
Maintenance Chief reacted to Normzilla's post in the thread Everyday day man's tree work and cutting thread with Like.
More
