lehman live edge slab's latest activity
-
lehman live edge slab reacted to hacskaroly's post in the thread is STIHL the only one doing 4-mix and how does that make more power than 2-stroke? with
Like.
I had a friend bring over his FS90, runs great for about 3-4 minutes and then dies out. Tested the valves and they were loose. Adjusted... -
Well I’m back to logging for the season. I’ve been running my 20” bar a lot lately, and the Duke’s chains I have are for my 25” bar...
-
It's a lot easier on the pawls for sure and a good practice,but the 572xp pulley is the same part as in a 562xp and the 550xp. It really...
-
lehman live edge slab reacted to Bill G's post in the thread WANTED Allis Chalmers branded saws with Like.
This one is still pumping.
-
lehman live edge slab replied to the thread The 572XP Update Thread.This was not my intention, I just mentioned one guy with an issue and the dealership/husky so far hasn’t been able to make it work right...
-
lehman live edge slab replied to the thread The 572XP Update Thread.Yes the 462 had issues when got some hours on them there was a chance the piston would hit the diverter in case and break the skirt...
-
lehman live edge slab replied to the thread The 572XP Update Thread.Not 15, but yes did do a redesign to save a little weight but not really because of running issues. Slanted fins for better cooling and...
-
lehman live edge slab replied to the thread The 572XP Update Thread.100% never said junk just that they don’t all seem to perform to expectations that’s all. Stihls don’t either but do seem to have less...
-
lehman live edge slab replied to the thread Remington.It’s 3/8”
-
lehman live edge slab replied to the thread What's on your bench?.They’re not bad at all no idea why people don’t like working on them I do lots of 025,029,170’s
-
lehman live edge slab replied to the thread MCCULLOCH The official McCulloch thread.Plenty came both ways and it was only the cover that’s different, I have 041av and 041av quickstops only difference is brake cover on...
-
lehman live edge slab replied to the thread Remington.I got some bars in a lot at an auction, in the lot was a nice looks like 20” Remington roller nose. I have no need for it are they worth...
-
-
I don't know on the Remington, in fact I don't know how the SP105 was connected...I just know that in some cases reversing the leads...
-
lehman live edge slab replied to the thread MCCULLOCH The official McCulloch thread.Rock auto has the crank seals for 4.24$
-
-
lehman live edge slab replied to the thread MCCULLOCH The official McCulloch thread.So what carb do you recommend? Any preference?
