hacskaroly's latest activity
-
When my father-in-law had his outdoor boiler installed the guy charged a huge amount to bore the hole in the cinder block wall. When I... -
In theory, the deco valve should hold pressure, but it is unreliable! I have lapped mine in and the only way I could get it to semi seal...
-
hacskaroly reacted to cinci5's post in the thread MCCULLOCH The official McCulloch thread with
Like.
Same here, I've been making kits for many years with the locktite as a part of the assembly. There have been no questions or complaints... -
Check your inbox.
-
Good morning, hoping to get an ipl for both an FS110 and an FS250 trimmer.
-
hacskaroly reacted to Scott Kelsey's post in the thread SOLD OEM Mcculloch piston pin removal tool with Like.
I have for sale an OEM factory Mccullochthis piston pin removal tool. I purchased this from the son of a fellow who raced Mcculloch...
-
I’m not understanding. You’re asking if the curved shaft edger can be changed to straight shaft?
-
Yes. I want to change a curved shafted trimmer to a straight shaft edger.
-
hacskaroly replied to the thread Stihl FC 56 C.If the shaft key matches between one with a straight shaft then it might be possible. Though if you try to use a straight shaft from a...
-
Hey! I’m new here. I have an old Stihl FC 56 C. I bought a new trimmer and the motor on the 56 is still good. I’d still like to use it...
-
I’d like to buy a like new/ minty ported 462. Let me know what you have.
-
I rebuilt my carb…fixed some issues but was still a pain to use so just replaced the whole thing. The kit came with carb, lines...
-
If the check valves in the primer base are working properly, a new primer bulb won’t make a difference. If they are leaking, then it...
-
srcarr - yes, each zone has 3 loops and each one has in individual valve to open and close, plus flow control valves on the return side...
-
so...which saw does this go on?:D
