Wow. I'm sort of shocked the 6100 is a small mount. You might be able to get some of the more recent universal 176 mounts to work.
http://www.acresinternet.com/cscc.n...be9970357dbcb17f88256e0e001f67e3?OpenDocument
Wow. I'm sort of shocked the 6100 is a small mount. You might be able to get some of the more recent universal 176 mounts to work.
http://www.acresinternet.com/cscc.n...be9970357dbcb17f88256e0e001f67e3?OpenDocument
Me too. And the uk ‘Makita 6100’ that I have came with a 18” .325... and the bar has a smaller radius tip than the .325 x force bar on the wee ps-420..
Go figure.
20” 3/8” versa cut bar and 21lpx chain ordered.
Lpx is both. Ramped pointed double rakerI think you want 72LGX or ELX. LPX is .325 iirc
Lpx is both. Ramped pointed double raker
Try stihl RS .325 on it. You will like it much better than lpx.Me too. And the uk ‘Makita 6100’ that I have came with a 18” .325... and the bar has a smaller radius tip than the .325 x force bar on the wee ps-420..
Go figure.
20” 3/8” versa cut bar and 21lpx chain ordered.
Is the gutter too far off to redrill?Thats still a D type tail shape in Oregon speak like the D025 Stilh and D009 Large Husqvarna. It could be made to fit the bar studs but the oiler holes still would be off.
Is the gutter too far off to redrill?
Is that puppy ported? Otherwise, it's a bit of an ask chunking a 24 inch bar on it in 3/8.
It could probably work but then you have to have 81dl for a "24 amd 70dl for a 20"