What's on your bench?

[merc_man]

Ouch. Thats a pricey fix.

View attachment 126089
Scag with a liquid cooled Kawasaki not charging, stator was burned out. Boy that was a treat. Had to flush the radiator, replace a leaking crank seal and oil pressure sending unit, muffler was cracked in several places and had to be welded, new exhaust gaskets, stator, voltage regulator (when the old stator fried it took the regulator with it) new battery, new fuel filter, and replaced the clutch locating arm and pin because they were almost worn completely through. All total it cost the guy $1,250.00

Sent from my SM-J320W8 using Tapatalk

 

[Deets066]

Bearings in an 066 yesterday.
Ported a 7900 and started it up and it needed bearings too. Tonight I split it and cleaned it up and put it back together.

View attachment 126475 View attachment 126476 View attachment 126477


The white top looked like ass with the new HD filter cover

View attachment 126479


So I sanded it with an orbital and 180 grit to knock off the shine and died it black.

Mo bettah

View attachment 126478

I put bearings in one, messed the seal up installing it and it’s been sittin ever since. Bout a month now. Lol

 

[big t double]

I put bearings in one, messed the seal up installing it and it’s been sittin ever since. Bout a month now. Lol

I bet I know a guy with that seal in stock in all fairness, I haven't worked on a saw since last year.

 

[Deets066]

I bet I know a guy with that seal in stock in all fairness, I haven't worked on a saw since last year.

You stock dolmar seals?

 

[GCJenks204]

You stock dolmar seals?

Or he was referring to Nate @fordf150 for the Dolmar seals...

I was just shocked that he has gotten so big time that he doesn't personally work on saws anymore. His Rodeo career must really be taking off...

 

[big t double]

You stock dolmar seals?

Meh...thought you were referencing the 066 he did. But sure...I'm sure you could make something work.

 

[T.Roller]

Or he was referring to Nate @fordf150 for the Dolmar seals...

I was just shocked that he has gotten so big time that he doesn't personally work on saws anymore. His Rodeo career must really be taking off...

Their is big money in Chicago for that ya know.

 

[big t double]

Their is big money in Chicago for that ya know.

I don't live in Chicago. Dave.

 

[Onan18]

Their is big money in Chicago for that ya know.

I don't live in Chicago. Dave.

 

[T.Roller]

I don't live in Chicago. Dave.

Wtf Ted why didn't you tell me sooner?

 

[ramrat]

Husqvarna 576 that the cir clip came out. The saw was locked up tight.

 

[Wilhelm]

Bearings in an 066 yesterday.
Ported a 7900 and started it up and it needed bearings too. Tonight I split it and cleaned it up and put it back together.

View attachment 126475 View attachment 126476 View attachment 126477


The white top looked like ass with the new HD filter cover

View attachment 126479


So I sanded it with an orbital and 180 grit to knock off the shine and died it black.

Mo bettah

View attachment 126478

She ain't red, but she looks hot nonetheless!

My Sachs-Dolmar 108 is benched, tore an rubber AV mount.
I have to check, but I should have a used old spare off a SD105 carcass.

My Dolmar PS-7310 will be on the bench one of these upcoming days.
I really have to pull that darn kitty cat (SLR) out of that muffler.
The PS-7310 is the only saw that makes my ears hurt, that's unacceptable!

 

[huskihl]

@ramrat

 

[460 magnum]

Husqvarna 576 that the cir clip came out. The saw was locked up tight.

Dang man that sucks.

How do u like ur 576 i just picked one up but haven't got to run in much but seams like a good saw so far

 

[usmcbuckwild]

Local guy just advertised a Husqy 272. Well used but runs. Not sure what to offer him

 

[merc_man]

Local guy just advertised a Husqy 272. Well used but runs. Not sure what to offer himView attachment 126535View attachment 126536View attachment 126537View attachment 126538

Start low and go from ther. Cash in hand does a lot of talking.

Sent from my SM-J320W8 using Tapatalk

 

[Dub11]

Local guy just advertised a Husqy 272. Well used but runs. Not sure what to offer himView attachment 126535View attachment 126536View attachment 126537View attachment 126538

$140

 

[Stump Shot]

Local guy just advertised a Husqy 272. Well used but runs. Not sure what to offer himView attachment 126535View attachment 126536View attachment 126537View attachment 126538

$150.00

 

[Dub11]

$150.00

That's what I was thinking but then I remembered my ATM only kicks out $20s.

 

[longleaf]

It does have the elusive brake handle though lol. Seems like every 2 series saw I find is missing the brake handle or the whole assembly. I was thinking 150 too