Welding saves, pictures please

[Moparmyway]

Flywheel got hungry on this one

Still have to turn the base true

 

[mdavlee]

Looks good.

 

[junkman]

Nice work

 

[Moparmyway]

Thanks guys !

 

[mdavlee]

Next one will be more challenging for you[emoji6]

 

[Moparmyway]

Next one will be more challenging for you[emoji6]

I still have to do the repair to the exhaust flange. I'll see how it turns out tomorrow morning

 

[mdavlee]

I still have to do the repair to the exhaust flange. I'll see how it turns out tomorrow morning

I'll see about building an intake block for one of these other ones I have here.

 

[stihl sawing]

Looks good, What did you get it smooth with? I saved a couple old lawnmower decks by welding em up but I promise you it was not pretty.lol it did work though.

 

[huskihl]

I can't heli-arc. But I have some JB Weld saves

 

[Moparmyway]

Looks good, What did you get it smooth with? I saved a couple old lawnmower decks by welding em up but I promise you it was not pretty.lol it did work though.

Elbow grease and a few files

I can't heli-arc. But I have some JB Weld saves

Pics ?

 

[huskihl]

Elbow grease and a few files


Pics ?

My ms361 porting test bed. It's got a few tanks on it now. I don't have any after pics, and I'm too scared to pull the muffler to take any lol. I re created the flange, drilled the bolt hole, and used a coarse threaded screw. And jb welded the screw in. It's still tight and the muff doesn't leak. I've got a new cylinder for it now. Just haven't had time to play with it

 

[huskihl]

That has to win the "ugly cylinder of the day" award

 

[Moparmyway]

That has to win the "ugly cylinder of the day" award

It does, but we need to see something repaired

 

[srcarr52]

Some dufus cut right through their wrap handle.

 

[fordf150]

Customer of mine volunteered to weld up a 7900 case for me.....returned looking good as new. Now im just waiting on free time to reassemble it with a new PTO case half and have a running 7900 again.

 

[czar800]

My ms361 porting test bed. It's got a few tanks on it now. I don't have any after pics, and I'm too scared to pull the muffler to take any lol. I re created the flange, drilled the bolt hole, and used a coarse threaded screw. And jb welded the screw in. It's still tight and the muff doesn't leak. I've got a new cylinder for it now. Just haven't had time to play with it
View attachment 22734

I shouldn't ask..... What happened!

 

[huskihl]

I shouldn't ask..... What happened!

Guy's kid backed over it with the chipper truck.

I fixed it up and ported the cylinder and it runs great lol. 5 tanks and no signs of overheating

 

[Moparmyway]

Got the exhaust done. Its going to get ported, so I didn't go crazy in the corner

 

[jake wells]

used a harbor fraught stick welder on this surprised it looks this good.

 

[srcarr52]

Stihl 046 with bad rod bearing run too long.