The other swap meet ........

[woodtool89]

I will swap a 1/2 bag of cheese curds for a warm can of Blatz light.........

 

[woodtool89]

This thread is already on my cut list.

Cut list?

holy *f-word in moley.....though I was the only one to have threads on that list?

 

[junkman]

Up for trade ,10 96 dl .404 chain cores ,just need to have new cutters installed ,drive links are still all reusable .

 

[junkman]

Also up for grabs are some scored 52 mm 046 pistons ,there is still enough left on them to turn them down to 50mm to reuse them in an 044

 

[thomas1]

Also up for grabs are some scored 52 mm 046 pistons ,there is still enough left on them to turn them down to 50mm to reuse them in an 044

How are the rings?

 

[junkman]

How are the rings?

If you file 2 mm off the gaps they should be fine .

 

[thomas1]

If you file 2 mm off the gaps they should be fine .

I don't have a 2mm file. Can I use a chain file?

 

[huskihl]

I don't have a 2mm file. Can I use a chain file?

Belt sander.



JMS is up

 

[thomas1]

If you file 2 mm off the gaps they should be fine .

I just tried this on some rings that were in my NOS 166 and it didn't work. I must have ran a file through the gaps for 20 minutes and every time I measured they were the same. I was thinking something wasn't right, so I called Caber and after they got done laughing they told me that filing the gaps is the completely wrong way to do this. Evidently, you have to file the rings, not the gaps. After their chief engineer explained it to me a few times I think I'm understanding where I went wrong.

 

[junkman]

Very good info sir ,i am writing that down so i don't mess up again .

 

[exSW]

I think I may have been offended.

 

[woodtool89]

so i don't mess up again

 

[Mastermind]

This thread is doomed.

 

[junkman]

This thread is doomed.

Got any good stuff to trade ?

 

[junkman]

I got half an axe handle up for grabs

 

[Dub11]

I got half an axe handle up for grabsView attachment 93772

Whats the other half looking like?

 

[thomas1]

There is no other half. Look closely at the pic, that's definitely not 50% of a handle. Buyer beware.

 

[Mastermind]

Got any good stuff to trade ?

I've got a 6 month old, half eaten Moon Pie.

 

[Termitebuffet]

I got half an axe handle up for grabsView attachment 93772

I can si the pic ....which half is that ...I also have a half....

Sawhawgz, ruining the internet since 2012...

 

[Termitebuffet]

I've got a 6 month old, half eaten Moon Pie.

Vanilla or chocolate? Double stuff ?

Sawhawgz, ruining the internet since 2012...