BonScott46
Pinnacle OPE Member
- Local time
- 9:36 AM
- User ID
- 1571
- Joined
- Jul 20, 2016
- Messages
- 1,056
- Reaction score
- 3,560
- Location
- Sweden
Noticed there were a couple of chips out of one of the slots on the rim sprocket on my ms261 along with the chain getting tight and going slack (hanging about 1/4 inch off the bar) as I would pull the chain around by hand. At first I thought the rim sprocket was defective but the problem persisted after trying two others. I am now thinking it is the clutch drum. Saw is about two years old, not abused and runs fine otherwise. Anyone else have this issue? Figured I would see what you guys think before I shell out 75 bucks on a clutch drum kit.