WANTED Older Stihl Small Saw

[Oddsandends]

I want to buy an older Stihl saw 41cc or under because I am tired of my 170. Preferably running. Is anyone selling one of these saws?

 

[Czed]

Are you looking for a top handle saw
Like a 015
https://www.acresinternet.com/cscc....e0ac76f559d2b51088256ba20019e3fc?OpenDocument
These can be found reasonably priced.

 

[Oddsandends]

Are you looking for a top handle saw
Like a 015
https://www.acresinternet.com/cscc....e0ac76f559d2b51088256ba20019e3fc?OpenDocument
These can be found reasonably priced.

Not sure. I had one named Sisu before but sold it to somebody because I didn't want a small saw with no chain brake. I found a nice 011 AVT though that I think I will buy. I also want to get an MSE 141 or an old E10.

 

[emorris191145]

I have a ms250 in running condition, if you're interested?

 

[emorris191145]

Oddsandends did you find a daw you were looking for, I don't the ms250 is too small but she's a good runner, If you're interested

 

[IffykidMn]

Oddsandends did you find a daw you were looking for, I don't the ms250 is too small but she's a good runner, If you're interested

41cc or smaller per the OP.

 

[IffykidMn]

I want to buy an older Stihl saw 41cc or under because I am tired of my 170. Preferably running. Is anyone selling one of these saws?

 

[Oddsandends]

Oddsandends did you find a daw you were looking for, I don't the ms250 is too small but she's a good runner, If you're interested

I think I found a nice 011AVTEQ which I can hopefully snatch up.

 

[emorris191145]

Sweet, just thought I'd ask.

 

[Czed]

I've repaired a lot of the 011s over the year's
They are still popular.

 

[Wonkydonkey]

Those ms170's can be made to run better than stock wit a timing bump, muff mod and a carb change but if you want to up grade the cc's then yeh that’s cool.

 

[Oddsandends]

View attachment 408186
I've repaired a lot of the 011s over the year's
They are still popular.

You selling?

 

[Czed]

You selling?

That was a customer's saw
They are still pretty common here.

 

[Oddsandends]

That was a customer's saw
They are still pretty common here.

I'm going to put up a Husqvarna 450 rancher tomorrow. My Grandpa gave it to me. It was not his saw though. For sentimental value I'm keeping his old Makita tools.

 

[Bill G]

Just buy a 026 from me and with a bit of work have a good saw

 

[Ketchup]

I’ve got an 021 that’s yours for the shipping. Run’s erratic. Probably needs carb work.

 

[hacskaroly]

I am tired of my 170.

With a few mods, your 170 can be a little hot rod....

You can even go with a shorter 8" Milwaukee pole saw bar with a 31 DL 3/8p .043 skip chain...though you have to disassemble a regular chain and put it back together as skip...

 

[drf256]

I have a 020 rear handle I’d sell. Have to make sure it’s running first.

 

[av8or3]

I have a really nice 026 I just finished up. Yours for $300 shipped.

 

[Oddsandends]

Update: I will probably buy an 026 this summer, but I have since gotten an old old 020 and 009.