ms 462

[tree monkey]

I used said cock ring twice, just doesn't do it for me. going to go back to my old compressor thingy

 

[nohoff]

Its a cheap cock ring.
Its about 0.50 Euro.
They like those one time use cock rings, they use them for the MS 170 and MS 500i too.

 

[tree monkey]

it's a good 1 time use tool, just not the ticket for what i'm doing

 

[Redbull661]

it's Sunday morning and you guys are discussing cock rings! You guys should be in church repenting!!! Dirty bastids!


...while you dirty bastids are at church, Redbull is heading to the wood pile to repent and make a wood chip offering to the chainsaw gods!

 

[Mastermind]

I used said cock ring twice, just doesn't do it for me. going to go back to my old compressor thingy

Tin snips.....cheap ring compressor.

Simple.

 

[Mastermind]

So, have you cut the base on one of these yet Scott?

 

[tree monkey]

So, have you cut the base on one of these yet Scott?

not yet, just a gasket delete

 

[tree monkey]

had to cut the cylinder flange and squish with gasket delete

 

[Mastermind]

not yet, just a gasket delete

It's tricky.....

 

[Redfin]

It's got too much intake duration to me already....and a nice flat squish band. I'm not really expecting any of us to be taking much off the base on this one....but, time will tell.

You have been into two so far? Are the base line numbers similar to what Scott ended up with?

 

[maulhead]

I doubt that but my baby making game is strong.

You mean was strong, not is strong?

I heard that factory is now closed....

 

[Dub11]

You mean was strong, not is strong?

I heard that factory is now closed....

The pipe line is still intact.
Its her factory that's going to be shuttered

 

[maulhead]

The pipe line is still intact.
Its her factory that's going to be shuttered

Just keep practicing...

 

[Mastermind]

You have been into two so far? Are the base line numbers similar to what Scott ended up with?

I don't remember what Scott posted John. I've got a bone stock one here, and one that I've been into three times.

 

[Mastermind]

Let's talk about this new reset method again please. I wanna make sure I have it right.

 

[Redfin]

I don't remember what Scott posted John. I've got a bone stock one here, and one that I've been into three times.

Doesnt matter either way. Im just curious if they are as consistent as the 661 numbers.

 

[jk14]

Let's talk about this new reset method again please. I wanna make sure I have it right.

Video was posted by iceboy back on page 6. It seems like a pretty straight forward instruction. Skip to the 3:00 minute mark to get the new 362/462 procedure.

 

[tree monkey]

here's another vid of it. I messed up the first try and got it right the second try.
warm the saw for 1 min, shut saw off, start saw on choke, let it run on choke for 30-60 sec, depress throttle and hold till saw slows, (about 30 sec) done

 

[Mastermind]

Doesnt matter either way. Im just curious if they are as consistent as the 661 numbers.View attachment 143723

Durations make my head hurt.

Here's what I have for opening points.


Squish: .022”

Exhaust: 101°

Mains: 123°

Secondaries: 120°

Intake: 82°

That's using a ring in the bore.....not trying to shine a light to "see" when they open.

 

[Mastermind]

here's another vid of it. I messed up the first try and got it right the second try.
warm the saw for 1 min, shut saw off, start saw on choke, let it run on choke for 30-60 sec, depress throttle and hold till saw slows, (about 30 sec) done

Thanks Scott. Makes it simple sir.