leaving saws outside

[junkman]

Do you ever leave them outside ,or put away inside right after use ? Do they live in the back of your pickup bed ?Or sleep in a cozy warm shop ?
Place your vote
Yes this is a waste of time

 

[CR500]

I have left them in truck bed overnight, but they are usually stored inside.

Sent from my non internal combustion device.

 

[Rains]

Everything goes in the shop at night.

 

[exSW]

Put them inside after they cool down. This does lead to forgetting and them spending the night outdoors occasionally. That leaving them in the truck cab ended after one was stolen.

 

[Simondo]

I store them away safely ...no insurance cover if there not secured.

 

[junkman]

I keep them indoors after the works done for the day also ,keep the sun from fading them out ,i feel kind of bad though ,my 660 has been bolted to the mill for a few days now ,getting beaten on by the sun every day .

 

[Canadian farm boy]

Mine get used then cleaned up, chains sharpened and put back on a shelf in the shop ready and waiting for the next outing.

My saws almost never stay in the back of my truck and if they do my truck is parked in my yard. I also have a cap on my truck with tinted windows

 

[Chainsaw Jim]

Humidity seeps all the way down to the bearings each time the temperature changes in an open air shop or outside. The other day I was looking at a saw that was in the back of a buddies truck after a little light rain and after it dried off there was still condensation airing out from the exhaust outlet. It was like the saw was exhaling fog.

 

[Guido Salvage]

Who is Nathon???

 

[the GOAT]

I keep them indoors after the works done for the day also ,keep the sun from fading them out ,i feel kind of bad though ,my 660 has been bolted to the mill for a few days now ,getting beaten on by the sun every day .

You should buy a spare set of covers for use when you know the saw will get direct sunlight for more than 30 minutes.

 

[junkman]

You should buy a spare set of covers for use when you know the saw will get direct sunlight for more than 30 minutes.

I will just let them fade ,will give me a reason to start a how do i unfade my plastics thread .

 

[junkman]

Who is Nathon???

oly 999

 

[KenJax Tree]

They live in the side box on the truck and stay there all by themselves in the yard.
Except this weekend i brought a few of them home with me because i cut down 2 trees at my SIL house today.

 

[Dieselshawn]

My saws are stored under lock and key with 2 guard dogs on active duty....

When the saws are in the back of my truck, I'm always close by with one eye looking at the bed....

If I'm gonna be away from my truck, the saws are inside the cab, doors are locked, windows are tinted.....

My truck is my pride and joy. It is always locked.

Chainsaws are my weapons if anything happens to my truck....

 

[CR888]

I have a newly restored Partner R-16 in my lounge room...is that bad? I think its like a fine Piccasso. But all my work saws are in tool shed on shelves. They get the air compressor first, bars too and hung up, chains ground and put in zip locks. Missus thinks I'm crazy but her wardrobe is crazy....at least my saws pay for themselves and get used. Her 'must have' shoes and clothes just sit there.

 

[the GOAT]

They live in the side box on the truck and stay there all by themselves in the yard.
Except this weekend i brought a few of them home with me because i cut down 2 trees at my SIL house today.

Going to pull the cylinder?

 

[Chris Zautner]

One is in a box ready to go to the doctors.

 

[Czed]

I have One in each vehicle the rest under lock and key with cameras on my shop.where I used to live I got broke into four times in six months after living there 43 years lost a nib Alpina 600i lots of hand tools and a customers Jonesereds so if I own it it's secured.

 

[KenJax Tree]

Going to pull the cylinder?

Yes. Im gonna wear a surgical mask and powder free latex gloves to make sure i don't transfer any germs to the cylinder.

 

[Tor R]

Most time I let a spare stay in the forrest, and two in tractor.
Nowadays I want to build a couple cheap saws I can let stay left...
Those saws I like I always let stay indoor or in the tractor