The practical benefit of the Husky setup is that the fill hoses are fixed in place, so there is minimal stuffing round to refill fuel/oil. The Sceptor tank 'if' you want to pour from the fill hose you need to remove cap, take out hose thats stored in tank separate the three piece cap & assemble it then fill up. Unless you leave the hoses installed/setup like the husky but if the can falls over stuff runs out where the husky has a on/off nozzle. Having to pull out fill hoses & mess around means they can get contaminated with dirt which is no good as they are stored IN the fuel. I don't set them up just remove cap/hose and pour from tank.