how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[KS Plainsman]

I think the biggest thing is the blankets breathe and the tarps don’t so they trap moisture. He’s been buying them from harbor freight with coupons for like 1.99-2.99 per blanket.


Sent from my iPhone using Tapatalk

I'm definitely going to give them a go. Thanks again man!

 

[KS Plainsman]

Rained a few more hours yesterday afternoon, and today we got some snow flurries. The ground is covered, but not by much. I don't think it's supposed to amount to much.

I hope everyone has a good day!

 

[67L36Driver]

40cc of Stihl reed valve handy & cheap. [emoji108]

Sharpened chain, dressed bar and a partial ‘Dip’.

Cuts much better. [emoji106]

 

[Hedgerow]

40cc of Stihl reed valve handy & cheap. [emoji108]

Sharpened chain, dressed bar and a partial ‘Dip’.

Cuts much better. [emoji106]

That reminds me Carl..
I have a box of parts and bits for that line of saws you need. Came from a stihl dealer liquidation.

 

[67L36Driver]

That reminds me Carl..
I have a box of parts and bits for that line of saws you need. Came from a stihl dealer liquidation.

 

[Hinerman]

View attachment 226888

That is awesome!!!

 

[hoskvarna]

That needs to be kept.

Ya
Cut a cookie and poly it [emoji106]


Sent from Hoskey Hills

 

[67L36Driver]

Looking for an air filter cover for the 028.

I swore the last time I wasn’t dragging home an incomplete antique Stihl but this one is a Super. [emoji90]

 

[Semotony]

The air was almost dry before 2 then cold mist after lunch when I stayed in the van to show the mess I left. Was there at right time. Bobcat operator left the black walnut while all the rest was pushed into the pile noodled and cross noodled since it's wet stuff n I'm getting older

 

[Locust Cutter]

Mud...... tired of it
Hows y'all's Tuesday?

More PT, ate lunch with the Pastor of the Church I'm planning on joining, went in to work for a few and helped a buddy do some painting. I' like to do some light bucking in the yard, but the weather was crappy enough that I passed.

That needs to be kept.

Cut a cookie, lacquer it, and hang it on Matt's shop!

40cc of Stihl reed valve handy & cheap. [emoji108]

Sharpened chain, dressed bar and a partial ‘Dip’.

Cuts much better. [emoji106]

That looks like a saw that my little brother built that's in the barn. A customer of the Ace Hardware he worked at brought it in in pieces, and didn't want to spend more than $20 on it. Ended up giving to Rowe, and he redid the carb and a few other things, and it's a good little runner.

 

[Hedgerow]

That is awesome!!!

Robert sent me that..

Thought it was share worthy.

 

[67L36Driver]

More PT, ate lunch with the Pastor of the Church I'm planning on joining, went in to work for a few and helped a buddy do some painting. I' like to do some light bucking in the yard, but the weather was crappy enough that I passed.


Cut a cookie, lacquer it, and hang it on Matt's shop!


That looks like a saw that my little brother built that's in the barn. A customer of the Ace Hardware he worked at brought it in in pieces, and didn't want to spend more than $20 on it. Ended up giving to Rowe, and he redid the carb and a few other things, and it's a good little runner.

The 012 is the only one worthy of much effort. All predicated on the condition of the oil pump.

The above ran and oiled only needing a tank vent line and clean up. [emoji108]

 

[67L36Driver]

We may have to make a run to Bishops for an 028 air filter cover.

Shockley Impliment in Hiawatha is another one to check. [emoji848]

Evilbay pickings are slim and expensive. [emoji90]

 

[MACHINE]

Cold and bad wind .

Staying in wood shop with hot fire

Sent from my SM-G955U using Tapatalk

 

[KS Plainsman]

Cold and bad wind .

Staying in wood shop with hot fire

Sent from my SM-G955U using Tapatalk

We had that yesterday, and I stayed in the garage with a hot fire all day myself. Today is sunny, already 27 degrees and zero wind.

Have a good day everyone!

 

[sunfish]

View attachment 226888

Best thing I've seen in a long while.

 

[Locust Cutter]

Hi Don!!!

 

[Junkyard]

It’s a raw day around here. I’ve got one hydraulic hose to do and a service winch line to replace and I’m gonna get out of this wind. Yuck!

 

[MACHINE]

Check the metal where the stove pipe goes through the wall LOL

Sent from my SM-G955U using Tapatalk