SOLD ECHO 1001

[WKEND LUMBERJAK]

Posting this for Mojim( Jim Rodgers)Jim had @srcarr52 do some work to it."It's mildly ported. I didn't max out port widths, just changed timing a little here and there to make it little stouter. I also machined the base to set the squish. It's more like a blueprinted saw"
Set up for 404 comes with a like new Poulan Pro 36" bar and chain. It was ran at Hedgefest this weekend

1000.00 plus shipping.

 

[jacob j.]

That's a nice one, with the original muffler guard. Out of the four I own, none of them have that guard.

Mo_Jim is good people...

 

[67L36Driver]

Mo.Jim is finest kind. [emoji108]

 

[psuiewalsh]

Would look nice next to a 1201 @Lee H

 

[Lee H]

That is a sweet one but I already have two. Don't need anymore.

 

[srcarr52]

If anyone has any questions I'd be happy to answer them.

My understanding is this saw sat on a shelf for most of it's life, it has very little run time. It had a dead coil which may have been the cause. Jim had a parts saw that I borrowed the coil from to get this beauty running. Since fuel/oil lines are NLA I made bulkheads, connectors and whatever else was needed to use Oregon tygon lines. Everything fits nicely and doesn't leak a drop.

It's been run twice since I built it and drained after.

 

[WKEND LUMBERJAK]

@srcarr you cut with it Sat. What was your opinion on how smooth it was?

 

[mgr1]

Any vids?

 

[srcarr52]

Sorry. No videos. It cuts well, 4 strokes nice and cleans up once you get enough pressure on it. Old school long bar power!
@Homelite410 you made a cut with it too.

 

[Homelite410]

Sorry. No videos. It cuts well, 4 strokes nice and cleans up once you get enough pressure on it. Old school long bar power!
@Homelite410 you made a cut with it too.

Yes I did Shaun, it's a smile maker.

 

[mgr1]

Old school is what i like.
No funds at this time...

 

[WKEND LUMBERJAK]

Sold pending funds

 

[WKEND LUMBERJAK]

SOLD.