Brewz
Free Range Human in a Tax Farm
- Local time
- 1:06 PM
- User ID
- 550
- Joined
- Jan 16, 2016
- Messages
- 4,217
- Reaction score
- 14,302
- Location
- Hunter Valley - Australia
I bought one of those Huztl 070 kits.
Replaced the top end with an after market cylinder, ported it, Hyway piston and rings, OEM wrist pin bearing, replaced the 070 clutch with a complete OEM 6 shoe 090 setup and a rim sprocket drum wearing an 8 tooth 404 drive.
It went great but the vibration was really bad.
I have been slowly accumulating the parts I need to convert it to AV and today it got done.
I had to chop some of the Series 2 front AV mount casting off the front of the saws case, make a longer throttle rod and so a bit of bending and bashing of the old handle which was knocked up to get it to line up.
I now have a very usable saw
Replaced the top end with an after market cylinder, ported it, Hyway piston and rings, OEM wrist pin bearing, replaced the 070 clutch with a complete OEM 6 shoe 090 setup and a rim sprocket drum wearing an 8 tooth 404 drive.
It went great but the vibration was really bad.
I have been slowly accumulating the parts I need to convert it to AV and today it got done.
I had to chop some of the Series 2 front AV mount casting off the front of the saws case, make a longer throttle rod and so a bit of bending and bashing of the old handle which was knocked up to get it to line up.
I now have a very usable saw