HELP! Chainsaw carburetor tool

[JLHtreecare]

I am wondering what the best carburetor adjustment tool for Stihl is, need to get a couple for some of our saws we need to adjust the carburetors on

 

[Wilhelm]

Just get a set with the most spline shapes off eBay and You should be OK for most carbs.

 

[Wilhelm]

Something like this

Carburetor Adjustment Tool Set Screwdriver Kit Poulan Husqvarna Craftsman 10 Pcs | eBay

<p>Carburetor Adjustment Tool Set Screwdriver Kit Poulan Husqvarna Craftsman 10 Pcs</p>

www.ebay.de

 

[TheWizard]

I am wondering what the best carburetor adjustment tool for Stihl is, need to get a couple for some of our saws we need to adjust the carburetors on

I am a bit concerned that if you have to ask you may not know how to tune a carb properly. Some new to two strokes think by turning in the H screw they are getting more speed. Please please if your not sure then get someone who knows to do it. Not being funny just trying to help, it is easy to ruin a saw with half a turn too much. Good luck

 

[Ketchup]

A tachometer is also helpful.

 

[bretts]

I am a bit concerned that if you have to ask you may not know how to tune a carb properly. Some new to two strokes think by turning in the H screw they are getting more speed. Please please if your not sure then get someone who knows to do it. Not being funny just trying to help, it is easy to ruin a saw with half a turn too much. Good luck

I am a bit concerned that there is a fair bit of assumption in this comment.

 

[Lnk]

I am a bit concerned that there is a fair bit of assumption in this comment.

I think he was just making sure in case someone reads this and doesn't know what they are doing they could ruin a saw. He was trying to save someone money. Don't take it personal. He doesn't know whether you know or not.

 

[dall]

alot of information is not given in the first post
so we do not know what saw is in question
what the saw is being used to do

 

[huskihl]

Which stihl carburetor needs a driver? I realize some of the current generation of homeowner saws and smaller pro saws have steel caps but they just need a standard Allen key to turn the jets

 

[JLHtreecare]

I am a bit concerned that if you have to ask you may not know how to tune a carb properly. Some new to two strokes think by turning in the H screw they are getting more speed. Please please if your not sure then get someone who knows to do it. Not being funny just trying to help, it is easy to ruin a saw with half a turn too much. Good luck

I am asking for my boss, he knows how but h wants curious what you all thought was best option to buy

 

[JLHtreecare]

alot of information is not given in the first post
so we do not know what saw is in question
what the saw is being used to do

Our saws are use o do tree work, I am not to the one working on them but to my boss. He has been working on them for a while now and was so just curious for others input since there are so many options so we figured we would ask on here, we know how to tune and if we don't then we take it to someone who does

 

[dall]

Our saws are use o do tree work, I am not to the one working on them but to my boss. He has been working on them for a while now and was so just curious for others input since there are so many options so we figured we would ask on here, we know how to tune and if we don't then we take it to someone who does

And the bank account number you want the money sent to in Nigeria ?

 

[dall]

@Mastermind

 

[Mastermind]

@Mastermind

He's actually in Florida.

But as for tools and methods of adjusting Stihl saws, I'd rather not comment.

 

[dall]

He's actually in Florida.

But as for tools and methods of adjusting Stihl saws, I'd rather not comment.

Most saws that are not mtronic are just a flat head
When asked what saw
Get a run around answer
So if he’s not going to say what saw then why should any of us respond to that other than being a smart ass
But if you give your bank account info it can be cleaned out tomorrow

 

[JLHtreecare]

I posted on here because I was told you guys would be helpful but since most don't want to help or want to mock them I will just figure it out on my own

 

[dall]

I posted on here because I was told you guys would be helpful but since most don't want to help or want to mock them I will just figure it out on my own

That’s the best *f-wording thing that you can do
Since you are too *f-wording ignorant to say what model saws

 

[huskihl]

I posted on here because I was told you guys would be helpful but since most don't want to help or want to mock them I will just figure it out on my own

In post number 9 I asked you which saws needed specific drivers. I’m not aware of any special drivers for Stihl chainsaws.

Maybe try adjusting them with your self-serving passive aggressive attitude and see how that works

 

[dall]

In post number 9 I asked you which saws needed specific drivers. I’m not aware of any special drivers for Stihl chainsaws

I asked what models also

The retard doesn’t want to answer
So as far as I’m concerned he can go *f-word himself and take them to a dealer
My give a *f-words are gone

 

[huskihl]

My give a *Phüks are gone

I’d imagine so by now. You never had too many to begin with