Any Chinese chainsaw and chinese parts discussion

[Leafy]

Yeah that saw can be 45, 52, or 58 cc. But 52 is most common.

 

[Czed]

I bet that saw actually measures 52cc.

Reading the ad, they can't make up their mind as to was the saw is. In the description part way down the page they drop 10cc's off and add 0.8hp

Displacement:58CC
Power: 3.2kw
Horsepower: 4.4 hp

from top of page
Product letter rated power: 5.0kw/3.6hp. Engine Specifications: 68cc

I like reading the descriptions, lately it seems many times they have multiple descriptions in the same ad page. Hahaha

I ordered one it'll tear it down and check it.

 

[Leafy]

The one of those I bought years ago that was advertised as and has 62cc stickers as 52cc. eBay seller refunded me even after I measured it and called them out.

 

[Czed]

The one of those I bought years ago that was advertised as and has 62cc stickers as 52cc. eBay seller refunded me even after I measured it and called them out.

That's what I'm going to do
Actually there's some good reviews on YouTube if I lt is indeed 68cc
I bought it just to piss my neighbors who have 455 rancher's.

 

[Czed]

This is only 80.00 shipped
https://www.amazon.com/Xuanyue-Chai...874&sprefix=tophandle+chainsaw,aps,576&sr=8-4
My family have run the hell out of mine
Still runs like new.

 

[Leafy]

There’s 5% off on that too.

 

[qurotro]

They copy the Zenoah’s 52 or 58, just dress them up with different plastic. Open port jugs. Not a fast saw, but will do ok with 18 inch bar.

 

[Leafy]

For how light they are, if you get the quad transfer jug and a 372 carb they’re pretty fast.

5200 Hotsaw, now with 3/8 full chisel

 

[Czed]

It arrived and started easy
I'm a chainsaw professional expert now
I guess
It's kinda light
Dry empty
Full of mix and oil
I'll tear it down the next time I'm off work.

 

[Maintenance Chief]

It arrived and started easy View attachment 394749View attachment 394750
I'm a chainsaw professional expert now
I guessView attachment 394751
It's kinda lightView attachment 394752
Dry emptyView attachment 394753
Full of mix and oil
I'll tear it down the next time I'm off work.

@Czed I'd like to see the bar mount area, I'm interested to see if its a D176 or some other variety? When you tear it down.

 

[Czed]

@Czed I'd like to see the bar mount area, I'm interested to see if its a D176 or some other variety? When you tear it down.

Looks .325 k095 I'm working I'll check tomorrow

 

[Leafy]

Yeah k095 rings a bell. And the 20” bar isn’t 20”s worth of chain more like 19 and change. So you should buy a new bar or else if you want name brand chains you need to find the one guy on eBay making them to the right link count off of a spool.

 

[Czed]

@Czed I'd like to see the bar mount area, I'm interested to see if its a D176 or some other variety? When you tear it down.

it's k095 and .58 gauge of course
That's all they know is damn .58 gauge.

 

[Czed]

Bastard's lied to me
58cc
It only had a 1/2 inch opening on this baffle so I cut it out

It runs about like a ms290/310 455/460 but much lighter
It does vibrate more than the brand saws.
I cut a bunch of hardwood and it did fine
It took a lot of pressure to stall it out.
Make a decent firewood saw for my brother
I hate assisted start saws.

 

[Czed]

Checked on the 372 i gifted my niece

It's about 6 year's old now
I ran it a lot for a few year's cutting dead ash
It has a 50mm china cylinder with a 268 popup
I've never done anything to it
Now it lives on supertech 50/1 and used motor oil as bar oil they run in it
They wore out my old windsor bar.

 

[Maintenance Chief]

Checked on the 372 i gifted my niece
View attachment 396556View attachment 396557View attachment 396558
It's about 6 year's old now
I ran it a lot for a few year's cutting dead ash
It has a 50mm china cylinder with a 268 popup
I've never done anything to it
Now it lives on supertech 50/1 and used motor oil as bar oil they run in it
They wore out my old windsor bar.

Those old Speed tip Windsors are tuff bars! Not easy to wear out.

 

[Maintenance Chief]

Guess I'll see how this goes.

 

[Czed]

View attachment 396580View attachment 396581View attachment 396582
Guess I'll see how this goes.
View attachment 396584

Are you going to try it stock?
On the am 372s some but definitely not all of the
Am Cylinder's with terrible looking ports
Were as strong as OE
A couple of the hyway bb cylinder kits were strong
One definitely was not it only had 110# the test were 150/60s

 

[Maintenance Chief]

Are you going to try it stock?
On the am 372s some but definitely not all of the
Am Cylinder's with terrible looking ports
Were as strong as OE
A couple of the hyway bb cylinder kits were strong
One definitely was not it only had 110# the test were 150/60s

I fired it up stock , but I really intend to run it modified.
It does run well and idle right out of the box. If the hyway cylinder doesn't have what it takes to improve the engine I'll just swap back to the original.

 

[Czed]

Wow, that is cheap. Walt gave me one of those in blue. Call it the Blu88. Hot some time on it with no issues. Actually feels pretty solid.

I went ahead and ordered one like your's for 186.00 shipped black friday sale.
I have a few oem topends and several parts saws
and if i really want to see what it can take
I have a very strong mike lee ported oem 288 cylinder and new oem Husqvarna piston.

https://www.farmertec.com/87cc-Holzfforma%C2%AE-Blue-Thunder-G288-Gasoline-Chain-Saw-Power-Head-Without-Guide-Bar-and-Chain-Top-Quality-By-Farmertec-All-parts-are-For-Husqvarna-288-Chainsaw-p1033225.html