Any Chinese chainsaw and chinese parts discussion

[Czed]

Just months ago 62cc topends were everywhere they must have dried up.

 

[old 040]

40.00 52cc ebay but i messaged the seller to ask what all they will fit he has the 62cc i want.

Yep, that same seller claims to have the 45cc top ends as well, my guess is that the 52/58cc top ends won't fit the 45cc saws.

 

[Czed]

I'd say you're right a simple woods port woke mine up.

 

[old 040]

I'd say you're right a simple woods port woke mine up.

Yep, mine seams to run good enough that I don't see a need to change it, if I want more cc I'll just buy another saw being as cheap as they are.....

 

[old 040]

Here's a few pics of my Bluemax 45cc with the cover off, didn't see any embossed cc size on the cylinder, maybe once I pull it down at a later date I'll find one, I did replace the cheap seal ring on the air filter with a o-ring and added a corresponding o-ring down the air cleaner stud, I can tell now that it feels like it's sealing, time will tell, I also oiled the throttle and choke shafts and linkages, seams to operate much smoother now...

 

[Czed]

Thanks mine was stamped on the left of the cylinder I've got friends that have been running those for years they have been tough saws.

 

[old 040]

Sparkplug hole is almost at a 90 degree so measuring the stroke may not be accurate.

 

[Czed]

nice!!!

Quietfly did you get one.
mine didn't need anything done to it they run good out of the box.
i just wanted to see what a simple woods port would do It's my new truck saw lol

 

[old 040]

Was just reading on Scott's site (chainsawr) that the 45, 52 and 58cc top ends will all interchange, may need to talk with him to confirm.....

 

[Czed]

Was just reading on Scott's site (chainsawr) that the 45, 52 and 58cc top ends will all interchange, may need to talk with him to confirm.....

That's good to know I've been seeing more of these around so they will end up at my place eventually to be fixed lol
Still trying to find out if the 62cc will fit mine.

 

[old 040]

Not sure, but I think the 62cc is a different chassis saw...

 

[old 040]

Was just reading on Scott's site (chainsawr) that the 45, 52 and 58cc top ends will all interchange, may need to talk with him to confirm.....

He also posted some specs for the piston pin, but not the stroke, still would like to know for sure what it is on all three saws, 45, 52 and 58cc.

 

[Czed]

Mine will cut with my stock echo 590 but it's s 3/8 and this ones .325 very close anyway.

 

[Mastermind]

Smells like soy sauce in here.

 

[Czed]

Smells like soy sauce in here.

Tastes like it too.

 

[Simondo]

Have you found this yet Dave....

 

[old 040]

Smells like soy sauce in here.

Hmmm........why do I get the feeling you'll be port'n one of these before you know it!........

 

[Czed]

Kingpark Filled ready to cut 18 inch bar.

 

[Czed]

Stihl 261 18 inch ready to cut.

 

[Czed]

Stihl 290 16 inch ready to cut.