HUSQVARNA 162 thru 272 parts swap meet thread

[CJ Brown]

Hey folks I don't know if there is a JRED 600 series parts thread, so I'm asking here. I'm looking for a 670 Super II clutch cover with a nice decal, or just a 670 Super II clutch cover decal. Alternatively, if someone has one in nice shape and could send me quality photos, then I could get repro decals made of them. If anyone is after a 670 CHAMP clutch cover decal, I got some pretty nice ones made that look good with gold leaf and all. Thanks.

Would your source be able to make some custom decals for an old Husqvarna 77?

 

[Smokealongthetracks]

Would your source be able to make some custom decals for an old Husqvarna 77?

I used Fast Decals out of Kansas I believe. They were really nice to work with, but you need a nice photo of the decal you desire and measurements for them to be able to do anything.

 

[CJ Brown]

I used Fast Decals out of Kansas I believe. They were really nice to work with, but you need a nice photo of the decal you desire and measurements for them to be able to do anything.

Thank you for your reply and info. Here is a link to the company you mentioned for those interested.

https://fastdecals.com/shop/

 

[NeSurcaster]

I could use a clutch drum and bearing for a 272. It's wearing a hole in the clutch cover and I'm tired of listening to it.
If nobody has a one any recommendations on a oregon or similar replacement would work as well. I don't have much husky stuff to trade other than some half wrap handlebars for a 562 and 272

 

[davidwyby]

@tiddler1 is looking for 266 metal flag parts

 

[davidwyby]

I have a set of 162 cases with no oil cap. It's a smaller cap and is vented. Not urgent but if someone has one...thanks

 

[davidwyby]

Have a buddy needing another cap. Anyone have a sample? I could make some.
@Spike60

 

[Woodslasher]

Have a buddy needing another cap. Anyone have a sample? I could make some.
@Spike60

Got a rough thread size? I have a few misc caps kicking around I could check.

 

[Woodwackr]

I don't know about the mechanics of 372 wraps, but to put a 266/272 wrap on a 266/272 you need a 288/395 brake flag.

Not on the 268 I recently built but most definitely on the 288.
I have a wrap brake for the 266-268 but it wasn’t necessary so I saved it

 

[Woodwackr]

Pics and pt#s for the needed caps?
I have a bunch but not sure what they go to
Some nos

 

[davidwyby]

Fuel cap I think
501 564 101

Won't be able to get sizes til next week

 

[Woodwackr]

Fuel cap I think
501 564 101

Won't be able to get sizes til next week

Don't have that pt#
Will any others work?
I've been using whatever fits and seals

 

[president]

Thank you for your reply and info. Here is a link to the company you mentioned for those interested.

https://fastdecals.com/shop/

I used sugar creek supply
really good quality

 

[davidwyby]

Ok, here is the PN etc for the 162 oil cap.

Husqvarna 44 - 162SE Chainsaw Vented Oil Cap 501 56 41-01 NEW (H-10)

Vented, small diameter oil filler cap. 501564101 NEW from old dealer stock Fits many older models of Husqvarna 162se 162sg 61 Rancher Practica 44 444 40 Rancher

chainsawr.com

 

[Czed]

Ok, here is the PN etc for the 162 oil cap.

Husqvarna 44 - 162SE Chainsaw Vented Oil Cap 501 56 41-01 NEW (H-10)

Vented, small diameter oil filler cap. 501564101 NEW from old dealer stock Fits many older models of Husqvarna 162se 162sg 61 Rancher Practica 44 444 40 Rancher

chainsawr.com

Here's a solution for you

 

[Shane¹]

Here's a solution for youView attachment 413836

And you can even get some cool reusable ones like this

 

[Czed]

Ok, here is the PN etc for the 162 oil cap.

Husqvarna 44 - 162SE Chainsaw Vented Oil Cap 501 56 41-01 NEW (H-10)

Vented, small diameter oil filler cap. 501564101 NEW from old dealer stock Fits many older models of Husqvarna 162se 162sg 61 Rancher Practica 44 444 40 Rancher

chainsawr.com

I don't have any of those
Could you mill down a different cap or plg to fit that thread pitch?
Something like these

10 Pieces PT Male Thread PPR Pipe Plug Garden Irrigation Tubing Stopper Drain Pl | eBay

Material: made of high quality PPR, strong and sturdy with good corrosion resistance, ensure high strength to last longer in the garden. Material Ppr. Thread Type NPT. Exterior Finish Brass. Number of Pieces 10.

www.ebay.com

Or a different saws plug.

 

[Czed]

And you can even get some cool reusable ones like this
View attachment 413838

Dallas will probably post a dent puller soon

 

[davidwyby]

@Czed I may make some. It's tricky to measure the thread size with just the female case and not a male cap too. Found a fuel cap for $44... other kid still needs oil cap.

 

[Czed]

@Czed I may make some. It's tricky to measure the thread size with just the female case and not a male cap too. Found a fuel cap for $44... other kid still needs oil cap.

I worked on a 064 that had a whittled down stick as a oil cap