60cc Shoot Out

[Nitehawk55]

Aren't you doing a Echo CS620 soon Randy ? , like to see one of those in the mix , even a CS590 just to see how well they do as an underdog .

Husky 555 too !

 

[mdavlee]

357 was a little lean at first. Lean is fast for a short bit.

6100 sounded good and it's right with the 357. 562 is consistent and no tuning.

 

[Jon1212]

disappointed i thought we was gonna see a real shootout but you left the stihl side out maybe because you know they are a better faster saw

I only have three 562s....

one to run and the other 2 for parts ?

Damn, Dallas. I never knew what a mean spirited bastard you are. Randy is using his Stihls........at least until he gets his parking brake fixed.

 

[Mastermind]

I'm running about two weeks or more behind right now. I had several rebuilds in a row that I didn't plan on. I have a new 620 here......but the 562 and the 357 will be gone before I get the 620 done. I can probably hang onto the 6100 for a comparison though.

 

[Mastermind]

357 was a little lean at first. Lean is fast for a short bit.

6100 sounded good and it's right with the 357. 562 is consistent and no tuning.

Dead on brother. I noticed it losing ground the more I cut with it. I fattened it up......but it was too hot to make a solid recovery.

 

[mdavlee]

Dead on brother. I noticed it losing ground the more I cut with it. I fattened it up......but it was too hot to make a solid recovery.

Yep. It was heat soaked and hotter than optimum.

 

[exSW]

I think a twenty inch bar and a little bigger wood and it wouldn't even have been close.

 

[Mastermind]

Yep. It was heat soaked and hotter than optimum.

It ain't doing too bad with an EL42 is it Mike?

 

[Mastermind]

I think a twenty inch bar and a little bigger wood and it wouldn't even have been close.

Oh you guys and your big wood. LOL

 

[mdavlee]

It ain't doing too bad with an EL42 is it Mike?

Not at all. I need to get around to swapping the carb on my 346. It only holds 13k in pine with .325".

 

[Mastermind]

Not at all. I need to get around to swapping the carb on my 346. It only holds 13k in pine with .325".

Is that all? Junk I tell ya.

 

[mdavlee]

Is that all? Junk I tell ya.

I know. Not bad for Jason's first 346.

 

[rburg]

I believe any of the 3 would be a good firewood saw.

 

[CoreyB]

Yep

 

[sunfish]

Good stuff Randy!

 

[Mastermind]

I know. Not bad for Jason's first 346.

Hell no........damn good for a first attempt.

 

[Warped5]

Those guinea fowl are pretty good watchdogs, too

 

[rburg]

I hope you can have some of these saws at your gtg. Or some very similar to them.

 

[sunfish]

I just wonder if the mastermind 357 will be faster than a stock 562.

 

[Mastermind]

Those guinea fowl are pretty good watchdogs, too

That they are Ted. They are a good judge of people too. They cornered a guy here once.........just screamed bloody murder till he was outta here. Guess what? That guy turned out to be a piece of chit thief.