- Local time
- 9:10 PM
- User ID
- 4
- Joined
- Dec 3, 2015
- Messages
- 47,964
- Reaction score
- 311,319
- Location
- Banner Springs Tennessee
So far.....knock on wood......this top end is good. I still have to set it up and check compression, squish, etc. I've checked the timing numbers and they are dead on what I asked for. Port shapes ain't bad either. The intake could be better.......but I've seen some pretty odd stuff on OEM jugs too.
OK......here's some pictures. OEM on the left.
OK......here's some pictures. OEM on the left.