What? No bandsaw milling threads?

[dall]

don't do that, just give it to me, so i can upgrade my logosol F2+ lol.

it will take him 10 years before he gets the shed built
his wife said she needed to get help when they was having kids because he was so slow

 

[Fleethirte]

i haven’t had time to mill anything. my wife got a travel trailer from her parents that has some water damage that is now on the top of her honey dew list.
it was a project just getting it into the shop.

 

[Ryan Browne]

i haven’t had time to mill anything. my wife got a travel trailer from her parents that has some water damage that is now on the top of her honey dew list.
it was a project just getting it into the shop.

Just leave it in the shop. The rain won't be a problem there.

 

[Fleethirte]

takes up to much space lol and we got a camping trip in july. i need a lean to for it on the shop

 

[Fleethirte]

i cut some oak for my grandfather in law. his hobby is wood working and makes each one of my kids a bedroom set and dressers. he made
my wife’s when she was a kid too.

i will have have four sets when he finishes my youngests lol.

i and looking forward to being able to contribute at least some wood

oaks seems to want to split more along the whole pcs then just the end like other woods…. but then again i think i had it drying in direct heat.

 

[Fleethirte]

this log has less rot around it then other oak logs i have milled. is that because it might be more heart wood or just a specific species of oak?

 

[Fleethirte]

photo dosent want to load…

 

[Sawdust Man]

Been doing other stuff......anybody else sawing lumber or building anything of late?

 

[Woodslasher]

I'm just about sworn off of chainsaw milling. In the future if I run across projects like this I'm going to talk to my buddy with a bandsaw mill and see if I can steal it for a bit. It took me and a neighbor 2.5 full days to mill 15 11' x 14" x 5" beams with a 660 and an alaskan mill. I've still got sawdust in my boots and can hear the 660 roaring at wot. Not all the beams are in the pic, and I still need to trim the 3 front guys. I milled them then was reminded that squaring 3 sides of a log is easier than edging 3 slabs.

 

[Woodslasher]

What do I need those beams for, you ask? Planter boxes, powers that be requested 4x8 (3' long end boards and 8' long side boards) made out of 4-6" wide slabs 14-18" tall. The log sizes dictated the actual dimensions, at 18" wide I'd get 1 beam per log. As it was I averaged 3 beams per log, although a beast that was a good 1000lb+ yielded 4 and almost was good for 5. Things got hairy trying to move it with peaveys, it was off centered and even with two guys fighting it and 3 sides squared off it still took us along for the ride when it started moving.

 

[Fleethirte]

chainsaw milling is rough, no comparison to a bandsaw mill. but your work looks great!

 

[Fleethirte]

What do I need those beams for, you ask? Planter boxes, powers that be requested 4x8 (3' long end boards and 8' long side boards) made out of 4-6" wide slabs 14-18" tall. The log sizes dictated the actual dimensions, at 18" wide I'd get 1 beam per log. As it was I averaged 3 beams per log, although a beast that was a good 1000lb+ yielded 4 and almost was good for 5. Things got hairy trying to move it with peaveys, it was off centered and even with two guys fighting it and 3 sides squared off it still took us along for the ride when it started moving.

i think if you left those slabs alone with the live edge they would be some nice
looking heavy duty planter boxes lol