15-20$ per ring to Husky, I put cabers in all my rebuilds nowadays.I put a $12 set of caber rings in my 026 because Stihl rings were $20 per ring.
Sorry, in my book oem isn't THAT much better.
Screw china! Bunch of communist pricks steal everything and reproduce sh*t copies of everyones ideas and designs. I will pay extra not to support them and get better quality products while doing so.
Maybe Stihl does but doubt Husky make many recalls.The stihl , husqvarna and many responsible companies make recalls if something its not ok loosing tones of money and maybe the fame of theirs names
What was wrong with the intakes?Maybe Stihl does but doubt Husky make many recalls.
Imaginate if Husky should done recall on their beautiful 340/345/346/353/357/359 plastic intake in their time, hell, they would gone bankrupt!
their partition wall intake who was used from 1999 up to 2007.What was wrong with the intakes?
I had several 346's during that time never had an issue.their partition wall intake who was used from 1999 up to 2007.
most had no issue like you, quite many got issue with the part wall intake with airleak as result, it wasnt a perfect system.I had several 346's during that time never had an issue.
I generally find that if you need rings you also need a piston.
I've been building a bunch of 066's using a single ring hyway piston from hl supply, the black coated ring that comes with it I actually prefer to cabers,after a couple cuts there seated. A caber is a good ring but so are the hyway ones,at least that's my experience with them.That's true , I've had real good luck with the Hyway kits from HLS , the quality has really impressed me .......however the rings do not and get replaced with Cabers . Not taking any chances with a new jug and piston for a few extra $$ and the customer doesn't get the say in it .