Pneumatic blowgun

[junkman]

OK, whatever I get I'll be sure to choose appropriate nails.

On another note, is a water separator/filter something I should worry about? Or is that more for the hardcore 10-hr a day types? I know if I was going to be painting that would be one thing, but I am only using nail guns and the like at this point.

You will not need one ,just drain the tanks once in a while .

 

[wildroamer]

OK, cool. Thanks for the help.

 

[jakethesnake]

Put some air tool oil through it once a while too but yeah as junkman stated

 

[Milkman31]

I wish I had one with an 8foot wand!!! To keep the saw grit off me.

 

[czar800]

Got a picture of the blow blowgun I use on the combine and other equipment. It also works pretty good at sweeping the floor...

Anyways it's 4' of 3/4" pipe with a ball valve. The handle that has the wing nut looking set screw turns and slides up & down the pipe and locks with the homemade wing nut.

 

[junkman]

Got a picture of the blow blowgun I use on the combine and other equipment. It also works pretty good at sweeping the floor...

Anyways it's 4' of 3/4" pipe with a ball valve. The handle that has the wing nut looking set screw turns and slides up & down the pipe and locks with the homemade wing nut.

View attachment 20516

One of the tire stores here had a pipe with a valve like that in it ,they hooked it to the 1 inch air hose for truck wheels ,would drop valve stems in it and open the valve ,those things shot a long long ways ,good 1/4 of a mile .

 

[skidooguy]

I have one similar to that for the combine as well. Very nice because barley chaff sucks to get covered in. I also have one called a radiator genie that is amazing for air filters and radiators obviously. I'll see if I can find it on the internets and get a link posted

 

[jakethesnake]

Nothing much worse than barley dust

 

[Al Smith]

If you are going to spray paint a good water trap is a must .Else the paint won't come out so good .

My shop is piped with 1/2" black iron pipe .Below each air chuck I have 12" of pipe and a ball valve to drain the water .Plus I have a large trap on the discharge of the two stage compressor going into to two 60 gallon tanks .140 PSI on 165 off .

 

[super3]

https://www.summitracing.com/parts/TTN-19378/


Rvalue on AS has his own line of these also.

 

[Homelite410]

Redigun.com

 

[amberg]

Nothing much worse than barley dust

Bearded barley dust.