Zoo City Sawz experience

[Jon1212]

So far I have had three saws built/rebuilt by @Termitebuffet (Randy).

Dolmar 5105 a low hour saw that I picked up on the cheap with a toasted piston. Randy did a stellar job with it, and even put the extra time and effort into the spaceship like muffler to make it a much better performer. Randy went above and beyond when the OEM piston started chipping along the edges from poor finish work from the manufacturer. He told me to just send it back, and he would take care of it.

Husqvarna 359 that I had built for my teenage son. All I can say is "Wow!" I should have kept it for myself.....LOL! All broken in and it pushes 190psi at almost 5000' in elevation.

Husqvarna 372XP-W that I called the MS460 killer....it now resides with @Greg Newman and he has also been mighty impressed with the saw.

 

[Greg Newman]

Husqvarna 372XP-W that I called the MS460 killer....it now resides with @Greg Newman and he has also been mighty impressed with the saw.

Jonathan is right, I am well pleased with this saw. It wears a 32" bar and pulls it thru hardwood with no struggle. I have not had any dealings with @Termitebuffet but the saw must be done right by him due to my crew is hard on saws or it wouldn't hold together.

 

[DSS]

Randy did a 670 Jred for me. Excellent saw, the thing is a torque monster. He went above and beyond with a couple of issues that I didn't know about as I hadn't seen the saw before he got it. Great guy to deal with.

 

[Toad22t]

Randy did a husky 254 for me. He does very clean work and as everyone else has mentioned, he goes above and beyond. I wouldn't hesitate to ever send another saw to him.

 

[hseII]

So far I've had 3 saws built by ZCS: all 3 are 026s, & they are Great Saws.

A fellow way up North has one now, but that is because I didn't need 3 026s.

I've also broke bread with Mista Hogg, & plan to Again.


P.S.
He's Pretty Damn Tall for a Midget.

 

[Toad22t]

So far I've had 3 saws built by ZCS: all 3 are 026s, & they are Great Saws.

A fellow way up North has one now, but that is because I didn't need 3 026s.

I've also broke bread with Mista Hogg, & plan to Again.


P.S.
He's Pretty Damn Tall for a Midget.

From what I have understood is that he is the tallest midget in NC.

Here is a video of the ZCS 254 running a 18" .325 with a 8pin sprocket.

 

[Edwad]

Randy is a great guy to deal with!!!

 

[Czed]

I had randy port 2 new oem barrels
For 372s for me.
2 different recipes worksaw and playsaw
They run excellent i have 8 pins
On both.
My falling saws i leave a 20 on the playsaw
And a 24 on the other.

 

[Homemade]

Good deal with randy too. I was looking for a 011 rear handle. The saw got driven over by the loader tractor. He sent me a compleat saw, granted it was in rough shape, for $50. I was more then happy to have a handle for $50 much less a compleat saw.

 

[David Young]

I have been around ported saws long time. Randy is on the shortlist of who I would currently recommend

he gets it. But fair warning he talks funny.

 

[Edwad]

I have been around ported saws long time. Randy is on the shortlist of who I would currently recommend

he gets it. But fair warning he talks funny.

Randy is top notch!

 

[Termitebuffet]

I have been around ported saws long time. Randy is on the shortlist of who I would currently recommend

he gets it. But fair warning he talks funny.

...

Sent from a potato

 

[Dub11]

I have been around ported saws long time. Randy is on the shortlist of who I would currently recommend

he gets it. But fair warning he talks funny.

Maybe you just listen funny?

Randy did a hot Craftsman 3.3 for me with a more bigger carb and fingers. Very fun to run!!

 

[Jimmy in NC]

You must know the perimeter pass word and which fork in the road to take depending on the creek's current level....just saying.

This 395xp was a beast..it pulled crazy hard. I was pulling up HARD on that handle.

 

[Czed]

Randys Does Great Work! Every One Of His Saws I’ve Ran Is Strong And Last Long. He’s Never Hesitated To Help Me With Anything. He’s A Good Man And A Good Friend. Here’s One Of The Saws He’s Done For Me. 371xp 28” Full Comp 8 Pin In Hard Dry Oak

You have to file an appeal
With YouTube
A bot shut your channel down for whatever reason.

 

[PA716]

Yea I filed it and I’m gonna post again when they put my channel back up. It’s the only video I’ve ever posted ‍

 

[Czed]

Yea I filed it and I’m gonna post again when they put my channel back up. It’s the only video I’ve ever posted ‍

You have to wear clothes while running a saw
or they'll ban you.

 

[PA716]

Randy Does Great Work! Every Saw I’ve Ran Of His Is Strong And Runs Long. He’s Never Hesitated To Help Me With Anything. He’s A Good Man And A Good Friend. Here’s One Saw He Done For Me. 371xp 28” Full Comp 8 Pin In Hard Dry Oak.

 

[NeSurcaster]

Randy basically built a saw from the ground up for me then ported it a few months later. I wanted it ported for rpm's since I got plenty of torque saws. Mission accomplished, I don;t have a tach but It's got great chain speed especially w/ the 8 pin rim. As long as your easy on the rakers and the dogs it will rip threw some wood when you keep the rpms up

 

[Czed]

Coming up on 5 year's
I'm still running my ZCS 372s
i use them for the biggest tree's I cut instead of my 288s