The Bubba Builds A Closed Port 55

[DuratecMan10]

Bar studs still tight?


Sent from my iPhone using Tapatalk

 

[67L36Driver]

Seems like I remember something about a 028 slug.....but none of those are 45mm.

50 Rancher is 44mm. [emoji848]

 

[Mastermind]

Bar studs still tight?


Sent from my iPhone using Tapatalk

Yes sir. Solid.

 

[Mastermind]

50 Rancher is 44mm. [emoji848]

I'm smelling what your steppin in Carl.

 

[DuratecMan10]

Yes sir. Solid.

Sweet!


Sent from my iPhone using Tapatalk

 

[DuratecMan10]

Jonsered 2149/53 is 44mm. [emoji445]


Sent from my iPhone using Tapatalk

 

[Barneyrb]

45mm piston?


Hhhmmmmmmmm

http://www.meteorpiston.com/Lists/G...5F%5Fx00d8%5F&FilterValue1=45%2E0000000000000

 

[Mastermind]

45mm piston?


Hhhmmmmmmmm

http://www.meteorpiston.com/Lists/Gardening/Join.aspx?List=831329fb-c6b1-403e-ab58-966a2b8b6758&ID=2039&Source=http://www.meteorpiston.com/Lists/Gardening/Catalog.aspx?View={CE32560A-49BF-47F8-9CFA-E52252EADD4C}&FilterField1=Diam%5Fx0020%5F%5Fx00d8%5F&FilterValue1=45%2E0000000000000

I was looking at that one too Randy.

I'm thinking (if this jug cleans up) that the 45mm Husqvarna 51 slug is what we'll end up using.

 

[Stihlbro]

I remember @Stihlbro posting about using a 51 piston and taking the lower edges offa the jug......

A 51 or 350(some or 353) are 45 mm. I did use one and still have the saw. It is not windowed like the original, but I ground the bottom of the cylinder to match the crankcase. It worked. I have pictures on photobucket but my account is over the limit.

One is factory piston, the other is piston mentioned.

 

[Mastermind]

A 51 or 350(some or 353) are 45 mm. I did use one and still have the saw. It is not windowed like the original, but I ground the bottom of the cylinder to match the crankcase. It worked. I have pictures on photobucket but my account is over the limit.

One is factory piston, the other is piston mentioned.

Not a lot of difference.....

Thanks Joey. Looks like I can save the jug. Gonna have at least one pretty good groove, but it's not horrible.

 

[Stihlbro]

Make the bottom of cylinder like this.

 

[Lightning Performance]

Early 029 piston. Could be a pop up in it, maybe. Should close down the squish. Never saw one myself.

 

[Stihlbro]

Dolmar 5100 45mm?

 

[Stihlbro]

Early 029 piston. Could be a pop up in it, maybe. Should close down the squish. Never saw one myself.

I think the skirt is too short.

 

[Lightning Performance]

I think the skirt is too short.

Bummer

 

[Mastermind]

View attachment 214383 View attachment 214384

Make the bottom of cylinder like this.

Like a 930 J'Red sorta.....

 

[Mastermind]

Early 029 piston. Could be a pop up in it, maybe. Should close down the squish. Never saw one myself.

Dolmar 5100 45mm?

I see no reason to look any further than the 45mm 51 slug.

 

[Deets066]

I see no reason to look any further than the 45mm 51 slug.

If I remember correctly, Dave has a 45mm Wiesco for a 346...

 

[Mastermind]

I've been trying to get Bubba to send me the damn pick chores !!!!

 

[Mastermind]

If I remember correctly, Dave has a 45mm Wiesco for a 346...

The phrase "throwing pearls out to swine" comes to mind...