PAST Tennessee GTG @ Mastermind's

[hseII]

I will if someone is wanting to purchase it. I'll load the whole truck up

I'm Interested in it.

 

[hseII]

Go to my site or call, I'll bring them. Save you on shipping . Also have stihl and Oregon chain.

What's your site?

Who are you for me to call?

So the cannon isn't used?

 

[Hedgerow]

No, we have had good soaking rain all night.

You never know what a blessing rain can be till you've not had any for 2 months..
Been there..

But, dry time is act good for the livestock..
Cuts down on lots of foot problems and parasites.
So good to have both..

 

[Icepick69]

What's your site?

Who are you for me to call?

So the cannon isn't used?

The cannon is new.
Apsbarshop.com
Ask for Krista.
(828) 676-2393

 

[hseII]

The cannon is new.

Apsbarshop.com

Ask for Krista.
(828) 676-2393

What time do y'all open?

 

[Icepick69]

She should be there now, I won't be back till tomorrow. I hope. I wanting to be at Randy's Friday. But mite be Saturday morning. I have a lot to do Thursday

 

[T.Roller]

Is this thing in danger of being burnt out do to the fires?

No fires near the gtg

 

[Icepick69]

I pray for all the people affected by the fires in and around Gatlinburg .
Give a prayer for all the firefighters and personnel involved

 

[Code_Red]

Icepick, I was on the site and the prices for the cannons are great right now. I was thinking about picking up a bar for both mine and dads saw.

total noob question though, the cannon website pdf says S1 for stihl > 62cc and C1 for < 62c. This being the case i would need an S1 mount for dads 044 and a C1 mount for my ms261?

I noticed in 20" length the S1 bar only comes in .050 gauge, is this still practical for saws that are ported and running faster through the cut or should you get .058 or .063? It also says this bar is out of stock, is there any chance of having it by saturday?

Thanks

 

[hseII]

Mike Lee,

This off the roll, 30 minutes to touch up chain, Race is gaining attention.

Let's iron out the details.

1. When:
Saturday Morning, between 0900-1100. More details to follow.

2. All chains will come off the same roll. Each individual will have 10,15,or 30 mins to dress up said chain.

3. Bar Length-?
4. Chain Pitch-?
5. Chain Gauge-?

I think whoever runs should pay for
That chain, (by the link), so the original purchaser isn't out a bunch of chain.

Let's do something longer: we all know a hopped up 084 can turn a 24" bar. [emoji41]

What else Mike?

 

[hseII]

Icepick, I was on the site and the prices for the cannons are great right now. I was thinking about picking up a bar for both mine and dads saw.

total noob question though, the cannon website pdf says S1 for stihl > 62cc and C1 for < 62c. This being the case i would need an S1 mount for dads 044 and a C1 mount for my ms261?

I noticed in 20" length the S1 bar only comes in .050 gauge, is this still practical for saws that are ported and running faster through the cut or should you get .058 or .063? It also says this bar is out of stock, is there any chance of having it by saturday?

Thanks

S1 is the 026-661 mount.
S2 is the 076, 084, 088, MS880, 090 mount.

 

[Icepick69]

Icepick, I was on the site and the prices for the cannons are great right now. I was thinking about picking up a bar for both mine and dads saw.

total noob question though, the cannon website pdf says S1 for stihl > 62cc and C1 for < 62c. This being the case i would need an S1 mount for dads 044 and a C1 mount for my ms261?

I noticed in 20" length the S1 bar only comes in .050 gauge, is this still practical for saws that are ported and running faster through the cut or should you get .058 or .063? It also says this bar is out of stock, is there any chance of having it by saturday?

Thanks

The 044 and 261 should take the s1 mount.
We are low on superminis but have some coming.
You wanting a superbar or super mini?
We are starting to restock our inventory, running 3phase in shop and buying new tooling, set us back some. We're just a one man show, with Krista helping. Wasn't for her. I couldn't do it

 

[Code_Red]

S1 is the 026-661 mount.
S2 is the 076, 084, 088, MS880, 090 mount.

Ok thank you. So it would be S1 for both saws.

This is what i was referring to from their site

 

[Mastermind]

I have a gnarly chunk of oak to try them chains in.

 

[Icepick69]

The 044 and 261 should take the s1 mount.
We are low on superminis but have some coming.
You wanting a superbar or super mini?
We are starting to restock our inventory, running 3phase in shop and buying new tooling, set us back some. We're just a one man show, with Krista helping. Wasn't for her. I couldn't do it

 

[Code_Red]

The 044 and 261 should take the s1 mount.
We are low on superminis but have some coming.
You wanting a superbar or super mini?
We are starting to restock our inventory, running 3phase in shop and buying new tooling, set us back some. We're just a one man show, with Krista helping. Wasn't for her. I couldn't do it

I run .325 on the 261 because its "more racey," that appears to only come in the mini, but am not opposed to running 3/8 on it to keep files and sharpening simple if you guys dont think i would lose the "fun" factor of the saw.

If i do that then i would be 2 super bars one 18 and 1 20

 

[Icepick69]

My personal preference is .325 on the 261 with a cannon super mini

 

[Icepick69]

The 044 will do fine with a 20" superbar. 3/8

 

[Icepick69]

Gauge is up to you. I run 3/8 .050 gauge cause stihl rsf33 (skip) only comes in .050 gauge

 

[hseII]

I run .325 on the 261 because its "more racey," that appears to only come in the mini, but am not opposed to running 3/8 on it to keep files and sharpening simple if you guys dont think i would lose the "fun" factor of the saw.

If i do that then i would be 2 super bars one 18 and 1 20

20" 3/8" lp on the 261 is fun, but you can't use it to knock your face chunk out, or it will dechain. Ask me how I knows.