Vancouver timber
Well-Known OPE Member
Stihl 064 chainsaw PHO can sell with a good used 18” Stihl pro bar or a 25” Stihl pro bar either would come with a new chain but will add $20 to the cost of shipping into the states and an additional $30 for the bar and chain. Saw was built by a certified Stihl master tech and was built to last and look good while doing some serious tree murdering. Highly sought after saw if buyer prefers the HD air filter kit I have a nos filter base and a nos filter cover I could swap out upon purchase. Payment will be via paypal anybody that knows these saws will know it’s very valuable and the list of parts is not a pile less then I’m asking wanted to keep this one but Xmas is just around the bend and it is what it is SOLID saw here boys runs perfect at high and at idle all work just done within last month and again it was done by a Stihl tech. Recoil was repainted I do have a nos recoil I could toss on but again would be additional cost
*** 800 obo shipped PHO only ***
So this saw was a complete rebuild the cases were split and bearings checked new gasket kit put into saw with new seals. New oem piston and wrist pin bearing installed base gasket delete and squish set (used oem dirko) TIGHT engine on this saw tons of compression. New spark plug fuel filter air filter backing air filter carb rebuilt new throttle trigger new tank some new mounts a new intake boot and chain brake handle new flush cut handle bars nos rear af cover new muffler cover rear part of muffler in good shape not all rusty was painted with high temp paint to match the cover new fuel lines
*** 800 obo shipped PHO only ***
So this saw was a complete rebuild the cases were split and bearings checked new gasket kit put into saw with new seals. New oem piston and wrist pin bearing installed base gasket delete and squish set (used oem dirko) TIGHT engine on this saw tons of compression. New spark plug fuel filter air filter backing air filter carb rebuilt new throttle trigger new tank some new mounts a new intake boot and chain brake handle new flush cut handle bars nos rear af cover new muffler cover rear part of muffler in good shape not all rusty was painted with high temp paint to match the cover new fuel lines
Last edited: