GeorgiaVOL
Super OPE Member
- Local time
- 12:09 PM
- User ID
- 2204
- Joined
- Nov 30, 2016
- Messages
- 198
- Reaction score
- 407
- Location
- Columbus GA
Would the timing being off cause a saw to run rich and lack power?
After messing with this one for a while I finally got it to start at just 1/4 turn out on the high and low and that was after I adjusted the metering arm to slightly below even with the floor of the carb.
After messing with this one for a while I finally got it to start at just 1/4 turn out on the high and low and that was after I adjusted the metering arm to slightly below even with the floor of the carb.
