Stihl 084 Auxiliary oil button

[jmester]

This is from T.34.85 technical information. I got all this info guess I should read it more.

 

[jmester]

I am leaning towards hunting down another cable. As there is no definite stop when I depress my button.

 

[huskihl]

View attachment 227755
This is from T.34.85 technical information. I got all this info guess I should read it more.

If your cable is stretched, maybe it’s possible to add some length to the sheathed portion. Like a tiny washer or a piece of brass tubing. Just cut a slot in it and pinch it back together over the cable

 

[Sawrain]

Below is mine fully depressed, I can push down till it bottoms out, but it’s just flexing.



This is Pushing hard Enough to just take up the free play.


Could sleeve it as Huskihl mentioned.



Please Don’t mind her current work clothes.

 

[jmester]

My lever does not quite go down as far as yours. Or at least it seems not to. So the definite stop is in the lever and not the button?

 

[Sawrain]

On this one of mine the button does bottom out, but it seems to pretty much coincide with the cable lever hitting full cable travel at the same time, there seems to be a Very slight Increase in resistance Just before the button bottoms.

 

[jmester]

Ok that makes sense. I will have to run it and see how it goes and correct any problems if there are any.

Thread from @Definitive Dave on the 084
http://opeforum.com/threads/084-info-thread.2065/