WANTED Stihl 066 parts. Misc

[sledneck22]

Looking for some parts. UPDATED
1. Clutch cover. Larger style for wrap. ordered from dukes
2.Decent cylinder cover along with air filter box and cover. Doesn’t need to be perfect but not cracked. Flat top. Still interested in a nice set of flat top plastics.
3.Piston. Oem or meteor. Kit preferable. Ordered Meteor
4.Av mounts? Are those still around? Let-r-rip
5. Any bars available? Are they the same Mount as my 044/462? If so then never mind. Can’t remember.SAME MOUNT - I have plenty then...
6.Short block clutchside case would be something of interest too. Using what I have
Whatchya all have to part with?

 

[stihl livin]

Bars from your 044/462 are same mount.

 

[Woodslasher]

Looking for some parts.
1. Clutch cover. Larger style for wrap.
2.Decent cylinder cover along with air filter box and cover. Doesn’t need to be perfect but not cracked. Flat top.
3.Piston. Oem or meteor. Kit preferable.
4.Av mounts? Are those still around?
5. Any bars available? Are they the same Mount as my 044/462? If so then never mind. Can’t remember.
6.Short block clutchside case would be something of interest too.
Whatchya all have to part with?

In order:
#1: The Duke has some pretty decent looking ones, I wouldn't hesitate about getting one of those.
#2: By filter box do you mean the orange part of the filter base? If so, I may have one. Use a MaxFlow filter setup, Stihl ones suck.
#3: Ebay would be my bet.
#4: Ebay/dealer. Find an ipl and scour the 'bay by part #, you can find some cheap oem stuff that way.
#5: Same mount.
#6: Old flat-top case half? If so, I've got one but an idiot ran the saw with the chain de-railed so it has a bit of rash at the bottom of the bar plate.

 

[sledneck22]

In order:
#1: The Duke has some pretty decent looking ones, I wouldn't hesitate about getting one of those.
#2: By filter box do you mean the orange part of the filter base? If so, I may have one. Use a MaxFlow filter setup, Stihl ones suck.
#3: Ebay would be my bet.
#4: Ebay/dealer. Find an ipl and scour the 'bay by part #, you can find some cheap oem stuff that way.
#5: Same mount.
#6: Old flat-top case half? If so, I've got one but an idiot ran the saw with the chain de-railed so it has a bit of rash at the bottom of the bar plate.

1.Are the duke covers plastic? I have an aftermarket one on now and it’s plastic. I do not want to run that. If dukes is cast mag I’ll look into it.
2. Can you still get a max flow for the 064/066? Id like a flat top cylinder cover most but with that the orange piece the carb bolts too and the filter cover is cracked so anything is better than nothing. I do have a decent round top 066 cyl cover but want it closer to original.
6. Can you send me a picture? Mine has the inner dog mount broke off and would rather replace instead of having someone try and weld and redrill. Id be interested.

 

[Woodslasher]

1.Are the duke covers plastic? I have an aftermarket one on now and it’s plastic. I do not want to run that. If dukes is cast mag I’ll look into it.
2. Can you still get a max flow for the 064/066? Id like a flat top cylinder cover most but with that the orange piece the carb bolts too and the filter cover is cracked so anything is better than nothing. I do have a decent round top 066 cyl cover but want it closer to original.
6. Can you send me a picture? Mine has the inner dog mount broke off and would rather replace instead of having someone try and weld and redrill. Id be interested.

I believe they are mag, @Duke Thieroff could say for sure. I've got a red-light filter base and a clutch side case half, I'll send pics either later today or tomorrow. Here's a LINK TO A MAXFLOW KIT

 

[sledneck22]

I believe they are mag, @Duke Thieroff could say for sure. I've got a red-light filter base and a clutch side case half, I'll send pics either later today or tomorrow. Here's a LINK TO A MAXFLOW KIT

Thank you. Send me info at your convienence.

 

[Duke Thieroff]

Hey!

Are you talking about the west coast clutch covers?

If so, they are mag

 

[sledneck22]

Hey!

Are you talking about the west coast clutch covers?

If so, they are mag

Yeah I was talking about the bigger covers. If they’re mag I’ll look into them. Thank you. I need a couple pistons too, I’ll maybe pick up a couple of those from you as well.

 

[Duke Thieroff]

Yeah I was talking about the bigger covers. If they’re mag I’ll look into them. Thank you. I need a couple pistons too, I’ll maybe pick up a couple of those from you as well.

Please do!

 

[ManiacalMark]

Have a few flat top cylinder covers I can get pics later

 

[Woodslasher]

Well, filter base was a bust as I didn't realize some numbskull put a huge-azz hole in it for a primer bulb, but here's the case half. All the screw holes seem to be fine and I don't see any corrosion anywhere, the only nasty thing is the lower lip on the bar pad.

 

[sledneck22]

Well, filter base was a bust as I didn't realize some numbskull put a huge-azz hole in it for a primer bulb, but here's the case half. All the screw holes seem to be fine and I don't see any corrosion anywhere, the only nasty thing is the lower lip on the bar pad.

It's hardly noticeable to me. Let me poke around in the shop tonight and compare it to mine. I'm sure the saw is a short block 066 but I want to do one last double check tonight to verify. Thank you for following through with pictures.

 

[sledneck22]

Well, filter base was a bust as I didn't realize some numbskull put a huge-azz hole in it for a primer bulb, but here's the case half. All the screw holes seem to be fine and I don't see any corrosion anywhere, the only nasty thing is the lower lip on the bar pad.
View attachment 318397View attachment 318398View attachment 318399

I tore my saw down to the case today. I think I’m just going to use my cases. I’ll be able to put a nut and bolt in the case still. Thank you for the pictures.

 

[sledneck22]

Updated original post. still interested in a nice set of flat top plastics. (cyl cover, filter base, 066 tags for top and recoil, (filter cover not needed as I ordered a max flow kit as suggested)
Thanks all.