Stihl 064 carb

[Onan18]

Stihl dealers can stihl order bing kits. but they're like 60 bucks a pop and that's US price, not Australia. lol

Your dealer can get Bing kits Jim, I went to three different Stihl dealers here and they all said that they couldn't even order them anymore.

@Brewz
Is this the bing carb kit you need? Seller is even in Australia

http://m.ebay.ca/itm/Carburetor-diaphragms-fit-Stihl-064-Dolmar-PS9000-for-Bing-49b-49A-49C-46-carbys-/122040172277?hash=item1c6a293ef5:g:vs0AAOSwkl5XgCUu&_trkparms=pageci%3A398493d1-b118-11e6-b306-005056b24170%7Cparentrq%3A8eb2bd491580a357c84769c9fff19097%7Ciid%3A16

That's great if all you need is gaskets, unfortunately the one I have needs a new needle valve as well.

Joe

 

[CR500]

How different is the needle?

I have a source on Zama and Walbro needles.

Sent from my non internal combustion device.

 

[Chainsaw Jim]

Your dealer can get Bing kits Jim, I went to three different Stihl dealers here and they all said that they couldn't even order them anymore.
Joe

If it's too hard for them to look up then they shine you on.
The guy at the stihl shop by my house spent about ten minutes on the computer before he found it. I could tell he almost didn't want to but it seemed to turn into a challenge he wanted to not lose.
When he found it he was amazed at the price of like 65 bucks.

I'm going to match up some other carb brands to a bing I have to see who fits it. I'm pretty sure there is a good enough match for everything except the pump side diaphragm.

 

[BuckthornBonnie]

Foragefarmer had a thread on Bings over on FHC. It seems that huztl carries a kit with a similar needle.

I have two 064s, both with bings. One runs great, the other has a slight idling issue and probably could use a kit (but still runs great in the cut).