- Local time
- 2:29 PM
- User ID
- 3634
- Joined
- Jul 22, 2017
- Messages
- 811
- Reaction score
- 2,663
- Location
- San Antonio, TX

Just finished rebuilding this one, and it's a beast! Just went through it - fuel line, impulse, carb kit, etc. Ported (didn't change port timing), muffler mod (added a port), ignition timing advanced. Piston to jug set at .025.
LOTS of pics and details here: https://opeforum.com/threads/hopping-up-an-036-pro.23033/
Comes with a Stihl 20" bar, running 3/8 .063 chain. Bar is in good shape; chain has a little life left in it.
Runs great - idles at 2,800. Set it to top out at 14,200 or so, four-stroking.
Saw isn't what I would call minty, but it just has minor wear. All plastic is good, all original hardware, no stripped threads, no case damage, etc. Lots more pics if you need to see any.
Only needs a choke rod, but I have one on order or I may be able to rob one from another saw.
Price is $600 + the ride. Trades possible for 1106/1109 (Contra/Lightning, 070/090) and 1111 (050/051/075/076) saws and parts.

LOTS of pics and details here: https://opeforum.com/threads/hopping-up-an-036-pro.23033/
Comes with a Stihl 20" bar, running 3/8 .063 chain. Bar is in good shape; chain has a little life left in it.
Runs great - idles at 2,800. Set it to top out at 14,200 or so, four-stroking.
Saw isn't what I would call minty, but it just has minor wear. All plastic is good, all original hardware, no stripped threads, no case damage, etc. Lots more pics if you need to see any.
Only needs a choke rod, but I have one on order or I may be able to rob one from another saw.
Price is $600 + the ride. Trades possible for 1106/1109 (Contra/Lightning, 070/090) and 1111 (050/051/075/076) saws and parts.

