FOUND IT Sears D44 Clutch Drum/Sprocket

[JKNW]

Looking for a 3/8 clutch drum/sprocket for a Sears D44 direct drive. Model number is 617.351050.

If anyone happens to know of a more common/available part that swaps over I'd love to hear about it too.

 

[erikb]

If you know the part number, let me know. I have a bunch of mystery clutch drums.
Erik.

 

[JKNW]

Working on figuring that out. The one used example I found on eBay had none.

 

[JKNW]

If you know the part number, let me know. I have a bunch of mystery clutch drums.
Erik.

Looks like Herr p/n N116-A7

 

[erikb]

I'll check the boxes in the morning.

 

[erikb]

I have one with original number 4304 on the box. It has N116-A7 stamped on the drum. Time to take some measurements.
Can you send your I.d. O.D. shaft size ? This one has the bearing pressed into it.
I'll send pic's tonight , with sizes.

 

[erikb]

Here's the pic's. The bearing wasn't pressed in after all. The grease was holding it in. Looks like it fits a 9/16 crankshaft. (.562)
Erik.