Sawponder
Well-Known OPE Member
- Local time
- 1:39 AM
- User ID
- 28682
- Joined
- Mar 11, 2024
- Messages
- 109
- Reaction score
- 108
- Location
- Virginia/N.Carolina
*will consider parting out, if you have any parts request, do let me know*
Im posting these saws in one post because they are behaving the same way. And are in similar condition, complete....needing a small once over to get back running great.
Its been almost 2 years since I had went through them, cleaned them up, base gasket deleted, went through the carbs, repaired the fuel lines/fitting, and they ran great. But theyve sat for close to 2 years and im struggling to get them started. They both cough with a couple pulls but cant get them to stay running.
Im betting it needs a carb kit or more likely needs the injector/choke rebuilt/replaced. Has the original tillotson hs236, I also never replaced the crank seals. So it would benefit from having those replaced, im sure.
Would like 275 plus shipping each
The first saw shown is the 116si
Im posting these saws in one post because they are behaving the same way. And are in similar condition, complete....needing a small once over to get back running great.
Its been almost 2 years since I had went through them, cleaned them up, base gasket deleted, went through the carbs, repaired the fuel lines/fitting, and they ran great. But theyve sat for close to 2 years and im struggling to get them started. They both cough with a couple pulls but cant get them to stay running.
Im betting it needs a carb kit or more likely needs the injector/choke rebuilt/replaced. Has the original tillotson hs236, I also never replaced the crank seals. So it would benefit from having those replaced, im sure.
Would like 275 plus shipping each
The first saw shown is the 116si
Attachments
Last edited:
