Random pics (that you took) thread...

[Steve]

I dont recall either.
I think it was a big GFY in the sky, very poorly done actually.
I dont possess mad editing skillz

I remember now! But i cant find it.

 

[Steve]

Got an IH cub in the shop. Got a case of the sitting in the woods for too long. Put a battery in it and it cranked real slow followed by smoke under the platform. Looks like taping two 2 gauge wires together is not an industry standard repair...

 

[redline4]

Got an IH cub in the shop. Got a case of the sitting in the woods for too long. Put a battery in it and it cranked real slow followed by smoke under the platform. Looks like taping two 2 gauge wires together is not an industry standard repair...

View attachment 226146 View attachment 226147

Wire nut and your good to go.

 

[Czed]

case 580 I went to look at for my nephew.
Owner said setting for a year or two
I'd say ten years
Luckily it was locked up
And needs the shuttle shift trans repaired
My nephew passed on it.been cutting hickory lately

 

[Steve]

View attachment 226156 View attachment 226157case 580 I went to look at for my nephew.
Owner said setting for a year or two
I'd say ten years
Luckily it was locked up
And needs the shuttle shift trans repaired
My nephew passed on it.View attachment 226159been cutting hickory latelyView attachment 226160View attachment 226161

Is that a buckin special?

 

[Czed]

Is that a buckin special?

Free Kelly's cruiser axe head free hickory handle
I'll take 350.00 for it
If you want it.

 

[DuratecMan10]

Gapping plugs that aren't pre-gapped. Even if they are, have to go by what percentage of.inch the engine specs call for.

Actual sign in my local Aldi. No eggs!

New "toy" aka tool I picked up off eBay. $10 with free shipping!

 

[Czed]

2020 Chinese 250cc
Hawk brand cost 1400.00
Runs good the owner said.
But he spun the valve core out by not inflating the
Rear tire enough.
somebody gave my sister two party yorkies the same woman also gave my nephew one.

 

[Steve]

Free Kelly's cruiser axe head free hickory handle
I'll take 350.00 for it
If you want it.

Paypal sent!


I have a bunch of nice kellys i need to get hung.

 

[merc_man]

Boat show day

Sent from my SM-G950W using Tapatalk

 

[merc_man]

Was lookin at this little 5 h.p. merc that runs on propane and the sails dip sshit comesnover yacking about it and saying hownyou can run the on little 1 pound campingbtanks or 20 pound bbq tanks.
So i ask how long does it run on on a one pounder and he says half hour. I think oh cool. Then he says and about 4 hours on the 20 pound. I say oh wow. It gets better fuel milage on the one pound then the 20 and just walk away. Lol.

Sent from my SM-G950W using Tapatalk

 

[merc_man]

Found my dream boat

Sent from my SM-G950W using Tapatalk

 

[merc_man]

Check out the welds on the stanly boat. Must be where the beginnners learn to weld.

Sent from my SM-G950W using Tapatalk

 

[chipper1]

It’s a 5.5 x 18 x 41’. It’s not something you want to lift! Lol

I would have liked to "lift" it. I enjoyed running the knuckle boom, a lot more than carrying the drywall .
I lost a couple yrs of pictures because of a bad card, had all the cool pics I took on jobs. Most were hard to get a feel for what was going on anyway, but I had no problem getting a lift of boards about anywhere the boom would reach. Had a lot of fun running them.

 

[chipper1]

Was lookin at this little 5 h.p. merc that runs on propane and the sails dip sshit comesnover yacking about it and saying hownyou can run the on little 1 pound campingbtanks or 20 pound bbq tanks.
So i ask how long does it run on on a one pounder and he says half hour. I think oh cool. Then he says and about 4 hours on the 20 pound. I say oh wow. It gets better fuel milage on the one pound then the 20 and just walk away. Lol.

Sent from my SM-G950W using Tapatalk

Is that a Canadian pound .

 

[redline4]

 

[Steve]

View attachment 226300 View attachment 226302 View attachment 226303 View attachment 226304 View attachment 226305

Thats a nice trench you cut in the snow there! How you likin it?

 

[redline4]

Thats a nice trench you cut in the snow there! How you likin it?

So far so good. I have a 80t blade on it. Biggest thing I cut today was probably 2" oak. Cuts decent.
Floundering around in knee deep snow sucks though. I will likely go back through in the spring once the snow is gone to get it trimmed down to the ground. But at least I'm making progress and can walk through this stuff where I've thinned it.

 

[Bigmac]

Going to give this guy an A+ for creative use of a blue tarp!
It was nice fit and finish! LOL

 

[Bigmac]

I would have liked to "lift" it. I enjoyed running the knuckle boom, a lot more than carrying the drywall .
I lost a couple yrs of pictures because of a bad card, had all the cool pics I took on jobs. Most were hard to get a feel for what was going on anyway, but I had no problem getting a lift of boards about anywhere the boom would reach. Had a lot of fun running them.

I can see it being a fun and challenging job at times! And then you see all of those YouTube videos of cranes toppling over…